Product catagories

Search Products

FilterClear All

Inquiry

Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

product-img product-img

5XL84 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$7.25

These drill bits come in standard sizes expressed in fractional inches. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRL9 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$4.70

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRN0 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$4.70

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRN1 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$4.15

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRN2 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$4.15

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRN3 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$4.15

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRN4 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$4.15

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRN5 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$6.46

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRN6 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.46

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRN7 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.77

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRP0 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.77

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRP1 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.31

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRP2 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.07

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRP3 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.07

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRP5 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.07

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRP6 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.75

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRP7 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.77

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRP8 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$5.66

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRR0 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.75

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRR2 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.45

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRR4 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$0.14

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRR5 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.45

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRR7 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$5.58

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRR8 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.98

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRR9 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.78

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRT0 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.78

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRT1 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.78

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRT2 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.78

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRT3 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$0.11

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

6PRT4 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.55

The TiN coating on these drill bits protects them from wear and heat when drilling steel, stainless steel, and aluminum. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drills move deeper into the workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
× Success！success