Product catagories

Search Products

FilterClear All

Inquiry

Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

product-img product-img

45YA39 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$22.91

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YA44 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$27.84

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YA49 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$283.19

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YA50 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$70.73

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YA62 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$70.73

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YA70 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$27.84

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YA75 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$106.86

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YA87 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$106.86

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YA91 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$27.84

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YA96 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$27.08

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YC02 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$124.67

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YC06 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$20.92

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YC07 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$32.63

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YC14 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$12.53

These drill bits come in standard sizes expressed in millimeters. They have a bright finish that is not affected when the bits' cutting edges are resharpened. They also have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YC15 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$17.12

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YC19 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$27.84

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YC22 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$15.30

These drill bits come in standard sizes expressed in millimeters. They have a bright finish that is not affected when the bits' cutting edges are resharpened. They also have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YC26 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$25.95

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YC37 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$21.94

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YC42 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$241.50

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YC45 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$21.56

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YC49 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$72.13

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YC61 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$22.91

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YC67 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$21.94

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YC72 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$124.67

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YC84 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$175.93

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YC96 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$183.28

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YD01 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$21.94

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YD06 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$21.94

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YD11 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$214.14

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
× Success！success