Product catagories

Search Products

FilterClear All

Inquiry

Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

product-img product-img

45YD12 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$21.94

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YD17 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$21.94

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YD22 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$18.26

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YD29 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$15.30

These drill bits come in standard sizes expressed in millimeters. They have a bright finish that is not affected when the bits' cutting edges are resharpened. They also have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YD30 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$21.25

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YD34 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$29.45

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YD37 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$18.00

These drill bits come in standard sizes expressed in millimeters. They have a bright finish that is not affected when the bits' cutting edges are resharpened. They also have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YD38 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$23.39

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YD42 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$21.94

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YD47 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$21.94

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YD52 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$21.94

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YD57 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$21.94

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YD62 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$21.94

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YD67 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$21.94

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YD72 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$21.94

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YD81 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$21.94

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YD86 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$21.94

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YD91 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$25.06

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YD92 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$37.11

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YE07 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$21.38

These drill bits come in standard sizes expressed in millimeters. They have a bright finish that is not affected when the bits' cutting edges are resharpened. They also have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YE08 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$28.58

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YE14 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$19.90

These drill bits come in standard sizes expressed in millimeters. They have a bright finish that is not affected when the bits' cutting edges are resharpened. They also have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YE15 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$28.36

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YE19 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$45.59

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YE30 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$29.00

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YE35 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$22.15

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YE39 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$175.29

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YE42 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$21.94

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YE51 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$20.92

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

45YE56 | Non-Coolant-Through Solid Carbide Jobber-Length Drill Bits

$20.92

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
× Success！success