Product catagories

Search Products

FilterClear All

Inquiry

High-Speed Steel Straight-Flute Hand Taps

product-img product-img

435R30 | High-Speed Steel Straight-Flute Hand Taps

$21.02

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

435R31 | High-Speed Steel Straight-Flute Hand Taps

$21.02

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

435R32 | High-Speed Steel Straight-Flute Hand Taps

$21.47

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

435R33 | High-Speed Steel Straight-Flute Hand Taps

$23.90

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

435R34 | High-Speed Steel Straight-Flute Hand Taps

$37.74

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

435R35 | High-Speed Steel Straight-Flute Hand Taps

$37.74

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

435R36 | High-Speed Steel Straight-Flute Hand Taps

$43.57

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

435R37 | High-Speed Steel Straight-Flute Hand Taps

$43.57

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

435R38 | High-Speed Steel Straight-Flute Hand Taps

$58.18

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

435R39 | High-Speed Steel Straight-Flute Hand Taps

$58.07

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

435R41 | High-Speed Steel Straight-Flute Hand Taps

$81.82

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

435R42 | High-Speed Steel Straight-Flute Hand Taps

$105.95

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

435T34 | High-Speed Steel Straight-Flute Hand Taps

$6.37

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

435T35 | High-Speed Steel Straight-Flute Hand Taps

$7.24

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

435T36 | High-Speed Steel Straight-Flute Hand Taps

$6.68

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

435T37 | High-Speed Steel Straight-Flute Hand Taps

$6.68

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

435T38 | High-Speed Steel Straight-Flute Hand Taps

$7.25

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

435T39 | High-Speed Steel Straight-Flute Hand Taps

$7.25

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

435T40 | High-Speed Steel Straight-Flute Hand Taps

$8.86

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

435T41 | High-Speed Steel Straight-Flute Hand Taps

$9.98

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

435T42 | High-Speed Steel Straight-Flute Hand Taps

$9.82

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

435T43 | High-Speed Steel Straight-Flute Hand Taps

$17.84

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

435T44 | High-Speed Steel Straight-Flute Hand Taps

$36.11

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

435T45 | High-Speed Steel Straight-Flute Hand Taps

$13.63

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

435T46 | High-Speed Steel Straight-Flute Hand Taps

$12.14

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

435T47 | High-Speed Steel Straight-Flute Hand Taps

$10.70

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

435T48 | High-Speed Steel Straight-Flute Hand Taps

$11.10

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

435T50 | High-Speed Steel Straight-Flute Hand Taps

$11.54

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

435T51 | High-Speed Steel Straight-Flute Hand Taps

$16.46

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

435T52 | High-Speed Steel Straight-Flute Hand Taps

$16.46

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
× Success！success