Product catagories

Search Products

FilterClear All

Inquiry

Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

product-img product-img

1F960 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.89

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. The bits' straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1F962 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.89

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. The bits' straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1F964 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.89

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. The bits' straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K250 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.97

These drill bits come in standard sizes expressed in millimeters. They have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K252 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.97

These drill bits come in standard sizes expressed in millimeters. They have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K254 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.95

These drill bits come in standard sizes expressed in millimeters. They have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K256 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.77

These drill bits come in standard sizes expressed in millimeters. They have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K260 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.05

These drill bits come in standard sizes expressed in millimeters. They have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K264 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.74

These drill bits come in standard sizes expressed in millimeters. They have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K266 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.65

These drill bits come in standard sizes expressed in millimeters. They have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K268 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.61

These drill bits come in standard sizes expressed in millimeters. They have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K270 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.58

These drill bits come in standard sizes expressed in millimeters. They have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K272 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.61

These drill bits come in standard sizes expressed in millimeters. They have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K274 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.61

These drill bits come in standard sizes expressed in millimeters. They have a bright finish that is not affected when the bits' cutting edges are resharpened, and they have spiral flutes that evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K276 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.49

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K282 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.45

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K284 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.57

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K286 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.45

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K288 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.57

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K294 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.64

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K296 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.46

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K298 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.60

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K300 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.46

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K302 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.57

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K306 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.57

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K308 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.46

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K312 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.49

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K316 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.25

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K318 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.41

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

1K320 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.47

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
× Success！success