Product catagories

Search Products

FilterClear All

Inquiry

Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

product-img product-img

2TJF1 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$5.18

The TiCN coating on these drill bits protects them from wear and is harder and more wear-resistant than a TiN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2TJF2 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$0.69

The TiCN coating on these drill bits protects them from wear and is harder and more wear-resistant than a TiN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2TJF4 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$0.67

The TiCN coating on these drill bits protects them from wear and is harder and more wear-resistant than a TiN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2TJF6 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$0.65

The TiCN coating on these drill bits protects them from wear and is harder and more wear-resistant than a TiN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2TJF7 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$0.65

The TiCN coating on these drill bits protects them from wear and is harder and more wear-resistant than a TiN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2TJF9 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$0.65

The TiCN coating on these drill bits protects them from wear and is harder and more wear-resistant than a TiN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2TJG2 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$5.11

The TiCN coating on these drill bits protects them from wear and is harder and more wear-resistant than a TiN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2TJG5 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$0.64

The TiCN coating on these drill bits protects them from wear and is harder and more wear-resistant than a TiN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2TJG6 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$0.62

The TiCN coating on these drill bits protects them from wear and is harder and more wear-resistant than a TiN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2TJG7 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$4.90

The TiCN coating on these drill bits protects them from wear and is harder and more wear-resistant than a TiN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2TJG8 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$0.60

The TiCN coating on these drill bits protects them from wear and is harder and more wear-resistant than a TiN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2TJG9 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$0.62

The TiCN coating on these drill bits protects them from wear and is harder and more wear-resistant than a TiN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2TJH1 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$4.85

The TiCN coating on these drill bits protects them from wear and is harder and more wear-resistant than a TiN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2TJH2 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$0.61

The TiCN coating on these drill bits protects them from wear and is harder and more wear-resistant than a TiN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2TJH3 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$0.59

The TiCN coating on these drill bits protects them from wear and is harder and more wear-resistant than a TiN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2UFA6 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.67

These drill bits come in standard sizes expressed in fractional inches. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2UFA7 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.45

These drill bits come in standard sizes expressed in fractional inches. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2UFA8 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.04

These drill bits come in standard sizes expressed in fractional inches. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2UFA9 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$4.14

These drill bits come in standard sizes expressed in fractional inches. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2UFC1 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$5.56

These drill bits come in standard sizes expressed in fractional inches. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2UFC2 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$8.59

These drill bits come in standard sizes expressed in fractional inches. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2UFE1 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.18

These drill bits come in standard sizes expressed in fractional inches. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2UFE2 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.62

These drill bits come in standard sizes expressed in fractional inches. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2UFE3 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$4.09

These drill bits come in standard sizes expressed in fractional inches. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2UFE4 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.05

These drill bits come in standard sizes expressed in fractional inches. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2UFE5 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.82

These drill bits come in standard sizes expressed in fractional inches. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2UFE6 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$4.48

These drill bits come in standard sizes expressed in fractional inches. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2UFE7 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$6.62

These drill bits come in standard sizes expressed in fractional inches. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2UFE8 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$5.06

These drill bits come in standard sizes expressed in fractional inches. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

2UFE9 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$5.32

These drill bits come in standard sizes expressed in fractional inches. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
× Success！success