Product catagories

Search Products

FilterClear All

Inquiry

Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

product-img product-img

4FWZ5 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.30

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a TiN coating that protects them from wear and heat when drilling steel, stainless steel, and aluminum. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4FWZ6 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.30

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a TiN coating that protects them from wear and heat when drilling steel, stainless steel, and aluminum. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4FWZ7 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.30

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a TiN coating that protects them from wear and heat when drilling steel, stainless steel, and aluminum. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4FWZ8 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.30

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a TiN coating that protects them from wear and heat when drilling steel, stainless steel, and aluminum. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4FWZ9 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.42

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a TiN coating that protects them from wear and heat when drilling steel, stainless steel, and aluminum. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4FXA1 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.30

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a TiN coating that protects them from wear and heat when drilling steel, stainless steel, and aluminum. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4HAV9 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.40

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4HAW1 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.48

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4HAW2 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.40

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4HAW3 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.34

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4HAW4 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.45

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4HAW5 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.52

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4HAW6 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.52

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4HAW7 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.52

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4HAW8 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.77

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4HAW9 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$1.77

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4HAX1 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.06

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4HAX2 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.10

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4HAX3 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.21

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4HAX4 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.21

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4HAX5 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.45

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4HAX6 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.66

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4HAX7 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.61

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4HAX8 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.57

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4HAX9 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.71

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4HAY1 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.44

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4HAY2 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.99

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4HAY3 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$4.43

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4HAY4 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$4.60

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
product-img product-img

4HAY5 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$4.54

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
× Success！success