Search Products

6EXN4 Step Drill Bits

$35.65

Bulk orders will be discounted, please contact us.

The shanks on these step drill bits have three flats that help prevent the bits from slipping in the drill chuck during drilling. These cone-shaped bits have steps of increasing diameter marked along their cutting head. As each bit is pushed into a piece of sheet metal or other thin material, each step on the bit widens the hole. The bits also have a self-starting split point that prevents the bits from moving, or walking, when starting to drill, which eliminates the need for using a center drill to create a starter hole before drilling.

Product Number: 6EXN4

SEND INQUIRY

  • Description
Mfr Model 6EXN4
Measurement System Fractional Inch
Decimal Equivalent 0.1875; 0.25; 0.3125; 0.375; 0.4375; 0.5; 0.5625; 0.625; 0.6875; 0.75; 0.8125; 0.875
Maximum Drilling Depth 3.5 mm
Overall Length 2-7/8 in
Shank Diameter 3/8 in
Shank Type Machining Straight with Three Flats
Impact Rated No
Finish Machining Black Oxide
Material Machining High Speed Steel
Primary Material Application Steel
Sub Brand Unibit
UNSPSC 27112801
Country of Origin China (subject to change)
Series 331-39115
Shank Hex Size 1/4 in
Shank Length 1 in
× Success!success