Product catagories

Search Products

FilterClear All

Inquiry

Boring Bars

product-img product-img

4XUD3 | Boring Bars

$10.88

id :39, Mfr Model :B100300, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :1-1/2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :1/8 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :0.3000 in, Measurement System :Fractional Inch, Min Bore Dia :0.1000 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUD4 | Boring Bars

$12.88

id :40, Mfr Model :B100400, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :1-1/2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :1/8 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :0.4000 in, Measurement System :Fractional Inch, Min Bore Dia :0.1000 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUD5 | Boring Bars

$12.88

id :41, Mfr Model :B100500, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :1-1/2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :1/8 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.1000 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUD6 | Boring Bars

$11.78

id :42, Mfr Model :B100600, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :1-1/2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :1/8 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :0.6000 in, Measurement System :Fractional Inch, Min Bore Dia :0.1000 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUD7 | Boring Bars

$11.10

id :43, Mfr Model :B100700, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :1-1/2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :1/8 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :0.7000 in, Measurement System :Fractional Inch, Min Bore Dia :0.1000 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUD8 | Boring Bars

$10.88

id :44, Mfr Model :B110150, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :1-1/2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :1/8 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :0.1500 in, Measurement System :Fractional Inch, Min Bore Dia :0.1100 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUD9 | Boring Bars

$11.41

id :45, Mfr Model :B110200, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :1-1/2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :1/8 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :0.2000 in, Measurement System :Fractional Inch, Min Bore Dia :0.1100 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUE1 | Boring Bars

$10.88

id :46, Mfr Model :B110300, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :1-1/2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :1/8 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :0.3000 in, Measurement System :Fractional Inch, Min Bore Dia :0.1100 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUE2 | Boring Bars

$11.77

id :47, Mfr Model :B110400, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :1-1/2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :1/8 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :0.4000 in, Measurement System :Fractional Inch, Min Bore Dia :0.1100 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUE3 | Boring Bars

$11.32

id :48, Mfr Model :B110500, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :1-1/2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :1/8 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.1100 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUE4 | Boring Bars

$10.88

id :49, Mfr Model :B110600, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :1-1/2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :1/8 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :0.6000 in, Measurement System :Fractional Inch, Min Bore Dia :0.1100 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUE5 | Boring Bars

$12.23

id :50, Mfr Model :B110700, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :1-1/2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :1/8 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :0.7000 in, Measurement System :Fractional Inch, Min Bore Dia :0.1100 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUE6 | Boring Bars

$14.27

id :51, Mfr Model :B120250, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :1/4 in, Measurement System :Fractional Inch, Min Bore Dia :0.1200 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUE7 | Boring Bars

$12.13

id :52, Mfr Model :B120350, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :0.3500 in, Measurement System :Fractional Inch, Min Bore Dia :0.1200 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUE8 | Boring Bars

$13.34

id :53, Mfr Model :B120500, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.1200 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUE9 | Boring Bars

$12.40

id :54, Mfr Model :B120600, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :0.6000 in, Measurement System :Fractional Inch, Min Bore Dia :0.1200 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUF1 | Boring Bars

$11.59

id :55, Mfr Model :B120700, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :0.7000 in, Measurement System :Fractional Inch, Min Bore Dia :0.1200 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUF2 | Boring Bars

$14.53

id :56, Mfr Model :B120800, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :0.8000 in, Measurement System :Fractional Inch, Min Bore Dia :0.1200 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUF3 | Boring Bars

$12.43

id :57, Mfr Model :B140250, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :1/4 in, Measurement System :Fractional Inch, Min Bore Dia :0.1400 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUF4 | Boring Bars

$14.38

id :58, Mfr Model :B140400, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :0.4000 in, Measurement System :Fractional Inch, Min Bore Dia :0.1400 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUF5 | Boring Bars

$12.46

id :59, Mfr Model :B140500, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.1400 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUF6 | Boring Bars

$12.98

id :60, Mfr Model :B140600, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :0.6000 in, Measurement System :Fractional Inch, Min Bore Dia :0.1400 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUF7 | Boring Bars

$11.59

id :61, Mfr Model :B140700, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :0.7000 in, Measurement System :Fractional Inch, Min Bore Dia :0.1400 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUF8 | Boring Bars

$11.97

id :62, Mfr Model :B140750, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :3/4 in, Measurement System :Fractional Inch, Min Bore Dia :0.1400 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUF9 | Boring Bars

$13.31

id :63, Mfr Model :B140800, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :0.8000 in, Measurement System :Fractional Inch, Min Bore Dia :0.1400 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUG1 | Boring Bars

$14.39

id :64, Mfr Model :B1601000, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :1 in, Measurement System :Fractional Inch, Min Bore Dia :0.1600 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUG2 | Boring Bars

$11.59

id :65, Mfr Model :B160250, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :1/4 in, Measurement System :Fractional Inch, Min Bore Dia :0.1600 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUG3 | Boring Bars

$12.31

id :66, Mfr Model :B160400, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :0.4000 in, Measurement System :Fractional Inch, Min Bore Dia :0.1600 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUG4 | Boring Bars

$12.19

id :67, Mfr Model :B160500, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :1/2 in, Measurement System :Fractional Inch, Min Bore Dia :0.1600 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
product-img product-img

4XUG5 | Boring Bars

$12.43

id :68, Mfr Model :B160600, Cutting Direction :Right Hand, Center to Cutting Tip :0.76mm, Features :Sharp Point, Cutting Application :Boring, Overall Length :2 in, Radius :Sharp Point, Boring Bar Type :Boring, Shank Dia :3/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, Side Cutting Edge Angle :6 °, UNSPSC :23171619, Country of Origin :USA (subject to change), Projection :0.51mm, Coolant Fed :Coolant Through, For Use With :Holder 4PNA6, Max Bore Depth :0.6000 in, Measurement System :Fractional Inch, Min Bore Dia :0.1600 in, Number of Coolant Holes :1, Shank Material :Carbide, Material Grade Machining :Submicron, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Composite; Copper, Primary Material Application ISO Code :N; O,

+ Add to Cart
× Success！success