Search Products

FilterClear All

Inquiry

Carbide Double-End Ball End Mills

19LW54 | Carbide Double-End Ball End Mills

$69.70

General purpose double-end carbide ball end mills are intended for milling a wide variety of common materials but are not suitable for milling hard materials like titanium or gummy materials like aluminum. The bright finish on these end mills provides a smooth, polished surface. Roughing/finishing end mills remove large amounts of material and create a smooth finish on the workpiece at the same time. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart

55HG95 | Carbide Double-End Ball End Mills

$48.41

id :11453, Mfr Model :245-001002, Material Machining :Carbide, Finish Machining :TiN, Measurement System :Fractional Inch, Milling Dia :1/8 in, Length of Cut :3/8 in, Overall Length :3 in, Shank Dia :3/8 in, Shank Type Machining :Weldon Flat, End Mill Style :Ball Nose, Number of Flutes :4, End Mill Application :Roughing/Finishing, Drilling Tool Configuration :Individual, End Mill Cutting Type :Center Cutting, List Number :245, Material Grade Machining :General Purpose, Primary Material Application :Cast Iron; Hardened Steel; Nickel; Stainless Steel; Steel; Titanium, Primary Material Application ISO Code :H; K; M; P; S, UNSPSC :27112803, Country of Origin :USA (subject to change), Spiral Direction :Right Hand, Coolant Fed :Non-Coolant Through, Helix Angle :30 °, Cutting Direction :Right Hand, Chip Breaker :No, Neck Length :0 in,

+ Add to Cart

55HG96 | Carbide Double-End Ball End Mills

$54.28

id :11454, Mfr Model :245-001041, Material Machining :Carbide, Finish Machining :TiN, Measurement System :Fractional Inch, Milling Dia :1/4 in, Length of Cut :5/8 in, Overall Length :3.5 in, Shank Dia :3/8 in, Shank Type Machining :Weldon Flat, End Mill Style :Ball Nose, Number of Flutes :4, End Mill Application :Roughing/Finishing, Drilling Tool Configuration :Individual, End Mill Cutting Type :Center Cutting, List Number :245, Material Grade Machining :General Purpose, Primary Material Application :Cast Iron; Hardened Steel; Nickel; Stainless Steel; Steel; Titanium, Primary Material Application ISO Code :H; K; M; P; S, UNSPSC :27112803, Country of Origin :USA (subject to change), Spiral Direction :Right Hand, Coolant Fed :Non-Coolant Through, Helix Angle :30 °, Cutting Direction :Right Hand, Chip Breaker :No, Neck Length :0 in,

+ Add to Cart

19LV53 | Carbide Double-End Ball End Mills

$12.64

General purpose double-end carbide ball end mills are intended for milling a wide variety of common materials but are not suitable for milling hard materials like titanium or gummy materials like aluminum. The bright finish on these end mills provides a smooth, polished surface. Roughing/finishing end mills remove large amounts of material and create a smooth finish on the workpiece at the same time. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart

19LV54 | Carbide Double-End Ball End Mills

$16.55

General purpose double-end carbide ball end mills are intended for milling a wide variety of common materials but are not suitable for milling hard materials like titanium or gummy materials like aluminum. The bright finish on these end mills provides a smooth, polished surface. Roughing/finishing end mills remove large amounts of material and create a smooth finish on the workpiece at the same time. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart

33GF44 | Carbide Double-End Ball End Mills

$52.55

General purpose double-end carbide ball end mills are intended for milling a wide variety of common materials but are not suitable for milling hard materials like titanium or gummy materials like aluminum. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings. Finishing end mills create a finer finish on the workpiece than roughing and roughing/finishing end mills. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart

33GF45 | Carbide Double-End Ball End Mills

$59.99

General purpose double-end carbide ball end mills are intended for milling a wide variety of common materials but are not suitable for milling hard materials like titanium or gummy materials like aluminum. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings. Finishing end mills create a finer finish on the workpiece than roughing and roughing/finishing end mills. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart

33GF46 | Carbide Double-End Ball End Mills

$40.14

General purpose double-end carbide ball end mills are intended for milling a wide variety of common materials but are not suitable for milling hard materials like titanium or gummy materials like aluminum. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings. Finishing end mills create a finer finish on the workpiece than roughing and roughing/finishing end mills. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart

33GF47 | Carbide Double-End Ball End Mills

$71.78

General purpose double-end carbide ball end mills are intended for milling a wide variety of common materials but are not suitable for milling hard materials like titanium or gummy materials like aluminum. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings. Finishing end mills create a finer finish on the workpiece than roughing and roughing/finishing end mills. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart

33GF48 | Carbide Double-End Ball End Mills

$76.14

General purpose double-end carbide ball end mills are intended for milling a wide variety of common materials but are not suitable for milling hard materials like titanium or gummy materials like aluminum. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings. Finishing end mills create a finer finish on the workpiece than roughing and roughing/finishing end mills. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart

33GF49 | Carbide Double-End Ball End Mills

$81.09

General purpose double-end carbide ball end mills are intended for milling a wide variety of common materials but are not suitable for milling hard materials like titanium or gummy materials like aluminum. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings. Finishing end mills create a finer finish on the workpiece than roughing and roughing/finishing end mills. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart

33GF50 | Carbide Double-End Ball End Mills

$127.63

General purpose double-end carbide ball end mills are intended for milling a wide variety of common materials but are not suitable for milling hard materials like titanium or gummy materials like aluminum. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings. Finishing end mills create a finer finish on the workpiece than roughing and roughing/finishing end mills. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart

33GF51 | Carbide Double-End Ball End Mills

$131.23

General purpose double-end carbide ball end mills are intended for milling a wide variety of common materials but are not suitable for milling hard materials like titanium or gummy materials like aluminum. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings. Finishing end mills create a finer finish on the workpiece than roughing and roughing/finishing end mills. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart
× Success!success