Product catagories

Search Products

FilterClear All

Inquiry

Carbide Double-End Square End Mills

product-img product-img

19LV09 | Carbide Double-End Square End Mills

$49.64

id :11734, Mfr Model :237-001033, Material Machining :Carbide, Finish Machining :AlTiN, Measurement System :Fractional Inch, Milling Dia :7/32 in, Length of Cut :9/16 in, Overall Length :3-1/2 in, Shank Dia :3/8 in, Shank Type Machining :Weldon Flat, End Mill Style :Square, Number of Flutes :2, End Mill Application :Roughing/Finishing, Drilling Tool Configuration :Individual, End Mill Cutting Type :Center Cutting, List Number :237, Material Grade Machining :C2 Micrograin, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Copper; Hardened Steel; Stainless Steel; Steel, Primary Material Application ISO Code :H; K; M; N; P, UNSPSC :23172005, Country of Origin :USA (subject to change), Material Applications :Carbon Steel; Prehardened Steel; Steel, Helix Angle :30 °, Cutting Direction :Right Hand, Neck Length :0 in, Neck Dia :0 in,

+ Add to Cart
product-img product-img

19LV10 | Carbide Double-End Square End Mills

$40.35

The bright finish on these end mills provides a smooth, polished surface. Roughing/finishing end mills remove large amounts of material and create a smooth finish on the workpiece at the same time. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart
product-img product-img

19LV11 | Carbide Double-End Square End Mills

$51.59

id :11736, Mfr Model :237-001043, Material Machining :Carbide, Finish Machining :AlTiN, Measurement System :Fractional Inch, Milling Dia :1/4 in, Length of Cut :5/8 in, Overall Length :3-1/2 in, Shank Dia :3/8 in, Shank Type Machining :Weldon Flat, End Mill Style :Square, Number of Flutes :2, End Mill Application :Roughing/Finishing, Drilling Tool Configuration :Individual, End Mill Cutting Type :Center Cutting, List Number :237, Material Grade Machining :C2 Micrograin, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Copper; Hardened Steel; Stainless Steel; Steel, Primary Material Application ISO Code :H; K; M; N; P, UNSPSC :23172005, Country of Origin :USA (subject to change), Material Applications :Carbon Steel; Prehardened Steel; Steel, Helix Angle :30 °, Cutting Direction :Right Hand, Neck Length :0 in, Neck Dia :0 in,

+ Add to Cart
product-img product-img

19LV12 | Carbide Double-End Square End Mills

$43.40

The bright finish on these end mills provides a smooth, polished surface. Roughing/finishing end mills remove large amounts of material and create a smooth finish on the workpiece at the same time. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart
product-img product-img

19LV13 | Carbide Double-End Square End Mills

$49.64

id :11738, Mfr Model :237-001053, Material Machining :Carbide, Finish Machining :AlTiN, Measurement System :Fractional Inch, Milling Dia :9/32 in, Length of Cut :11/16 in, Overall Length :3-1/2 in, Shank Dia :3/8 in, Shank Type Machining :Weldon Flat, End Mill Style :Square, Number of Flutes :2, End Mill Application :Roughing/Finishing, Drilling Tool Configuration :Individual, End Mill Cutting Type :Center Cutting, List Number :237, Material Grade Machining :C2 Micrograin, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Copper; Hardened Steel; Stainless Steel; Steel, Primary Material Application ISO Code :H; K; M; N; P, UNSPSC :23172005, Country of Origin :USA (subject to change), Material Applications :Carbon Steel; Prehardened Steel; Steel, Helix Angle :30 °, Cutting Direction :Right Hand, Neck Length :0 in, Neck Dia :0 in,

+ Add to Cart
product-img product-img

19LV14 | Carbide Double-End Square End Mills

$41.42

The bright finish on these end mills provides a smooth, polished surface. Roughing/finishing end mills remove large amounts of material and create a smooth finish on the workpiece at the same time. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart
product-img product-img

19LV15 | Carbide Double-End Square End Mills

$49.64

id :11740, Mfr Model :237-001063, Material Machining :Carbide, Finish Machining :AlTiN, Measurement System :Fractional Inch, Milling Dia :5/16 in, Length of Cut :3/4 in, Overall Length :3-1/2 in, Shank Dia :3/8 in, Shank Type Machining :Weldon Flat, End Mill Style :Square, Number of Flutes :2, End Mill Application :Roughing/Finishing, Drilling Tool Configuration :Individual, End Mill Cutting Type :Center Cutting, List Number :237, Material Grade Machining :C2 Micrograin, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Copper; Hardened Steel; Stainless Steel; Steel, Primary Material Application ISO Code :H; K; M; N; P, UNSPSC :23172005, Country of Origin :USA (subject to change), Material Applications :Carbon Steel; Prehardened Steel; Steel, Helix Angle :30 °, Cutting Direction :Right Hand, Neck Length :0 in, Neck Dia :0 in,

+ Add to Cart
product-img product-img

19LV18 | Carbide Double-End Square End Mills

$36.01

The bright finish on these end mills provides a smooth, polished surface. Roughing/finishing end mills remove large amounts of material and create a smooth finish on the workpiece at the same time. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart
product-img product-img

19LV19 | Carbide Double-End Square End Mills

$44.75

id :11742, Mfr Model :237-001083, Material Machining :Carbide, Finish Machining :AlTiN, Measurement System :Fractional Inch, Milling Dia :3/8 in, Length of Cut :3/4 in, Overall Length :3-1/2 in, Shank Dia :3/8 in, Shank Type Machining :Weldon Flat, End Mill Style :Square, Number of Flutes :2, End Mill Application :Roughing/Finishing, Drilling Tool Configuration :Individual, End Mill Cutting Type :Center Cutting, List Number :237, Material Grade Machining :C2 Micrograin, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Copper; Hardened Steel; Stainless Steel; Steel, Primary Material Application ISO Code :H; K; M; N; P, UNSPSC :23172005, Country of Origin :USA (subject to change), Material Applications :Carbon Steel; Prehardened Steel; Steel, Helix Angle :30 °, Cutting Direction :Right Hand, Neck Length :0 in, Neck Dia :0 in,

+ Add to Cart
product-img product-img

19LV20 | Carbide Double-End Square End Mills

$53.06

The bright finish on these end mills provides a smooth, polished surface. Roughing/finishing end mills remove large amounts of material and create a smooth finish on the workpiece at the same time. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart
product-img product-img

19LV21 | Carbide Double-End Square End Mills

$65.24

id :11744, Mfr Model :237-001093, Material Machining :Carbide, Finish Machining :AlTiN, Measurement System :Fractional Inch, Milling Dia :7/16 in, Length of Cut :7/8 in, Overall Length :4 in, Shank Dia :1/2 in, Shank Type Machining :Weldon Flat, End Mill Style :Square, Number of Flutes :2, End Mill Application :Roughing/Finishing, Drilling Tool Configuration :Individual, End Mill Cutting Type :Center Cutting, List Number :237, Material Grade Machining :C2 Micrograin, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Copper; Hardened Steel; Stainless Steel; Steel, Primary Material Application ISO Code :H; K; M; N; P, UNSPSC :23172005, Country of Origin :USA (subject to change), Material Applications :Carbon Steel; Prehardened Steel; Steel, Helix Angle :30 °, Cutting Direction :Right Hand, Neck Length :0 in, Neck Dia :0 in,

+ Add to Cart
product-img product-img

19LV22 | Carbide Double-End Square End Mills

$52.78

The bright finish on these end mills provides a smooth, polished surface. Roughing/finishing end mills remove large amounts of material and create a smooth finish on the workpiece at the same time. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart
product-img product-img

19LV23 | Carbide Double-End Square End Mills

$63.29

id :11746, Mfr Model :237-001103, Material Machining :Carbide, Finish Machining :AlTiN, Measurement System :Fractional Inch, Milling Dia :1/2 in, Length of Cut :1 in, Overall Length :4 in, Shank Dia :1/2 in, Shank Type Machining :Weldon Flat, End Mill Style :Square, Number of Flutes :2, End Mill Application :Roughing/Finishing, Drilling Tool Configuration :Individual, End Mill Cutting Type :Center Cutting, List Number :237, Material Grade Machining :C2 Micrograin, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Copper; Hardened Steel; Stainless Steel; Steel, Primary Material Application ISO Code :H; K; M; N; P, UNSPSC :23172005, Country of Origin :USA (subject to change), Material Applications :Carbon Steel; Prehardened Steel; Steel, Helix Angle :30 °, Cutting Direction :Right Hand, Neck Length :0 in, Neck Dia :0 in,

+ Add to Cart
product-img product-img

19LV24 | Carbide Double-End Square End Mills

$35.13

The bright finish on these end mills provides a smooth, polished surface. Roughing/finishing end mills remove large amounts of material and create a smooth finish on the workpiece at the same time. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart
product-img product-img

19LV25 | Carbide Double-End Square End Mills

$44.38

id :11748, Mfr Model :239-001003, Material Machining :Carbide, Finish Machining :AlTiN, Measurement System :Fractional Inch, Milling Dia :1/8 in, Length of Cut :3/8 in, Overall Length :3 in, Shank Dia :3/8 in, Shank Type Machining :Weldon Flat, End Mill Style :Square, Number of Flutes :4, End Mill Application :Roughing/Finishing, Drilling Tool Configuration :Individual, End Mill Cutting Type :Center Cutting, List Number :239, Material Grade Machining :C2 Micrograin, Primary Material Application :Cast Iron; Hardened Steel; Stainless Steel; Steel, Primary Material Application ISO Code :H; K; M; P, UNSPSC :23172005, Country of Origin :USA (subject to change), Material Applications :Carbon Steel; Prehardened Steel; Steel, Helix Angle :30 °, Cutting Direction :Right Hand, Neck Length :0 in, Neck Dia :0 in,

+ Add to Cart
product-img product-img

19LV26 | Carbide Double-End Square End Mills

$34.71

The bright finish on these end mills provides a smooth, polished surface. Roughing/finishing end mills remove large amounts of material and create a smooth finish on the workpiece at the same time. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart
product-img product-img

19LV27 | Carbide Double-End Square End Mills

$44.47

id :11750, Mfr Model :239-001013, Material Machining :Carbide, Finish Machining :AlTiN, Measurement System :Fractional Inch, Milling Dia :5/32 in, Length of Cut :7/16 in, Overall Length :3 in, Shank Dia :3/8 in, Shank Type Machining :Weldon Flat, End Mill Style :Square, Number of Flutes :4, End Mill Application :Roughing/Finishing, Drilling Tool Configuration :Individual, End Mill Cutting Type :Center Cutting, List Number :239, Material Grade Machining :C2 Micrograin, Primary Material Application :Cast Iron; Hardened Steel; Stainless Steel; Steel, Primary Material Application ISO Code :H; K; M; P, UNSPSC :23172005, Country of Origin :USA (subject to change), Material Applications :Carbon Steel; Prehardened Steel; Steel, Helix Angle :30 °, Cutting Direction :Right Hand, Neck Length :0 in, Neck Dia :0 in,

+ Add to Cart
product-img product-img

19LV28 | Carbide Double-End Square End Mills

$36.13

The bright finish on these end mills provides a smooth, polished surface. Roughing/finishing end mills remove large amounts of material and create a smooth finish on the workpiece at the same time. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart
product-img product-img

19LV29 | Carbide Double-End Square End Mills

$44.47

id :11752, Mfr Model :239-001023, Material Machining :Carbide, Finish Machining :AlTiN, Measurement System :Fractional Inch, Milling Dia :3/16 in, Length of Cut :1/2 in, Overall Length :3 in, Shank Dia :3/8 in, Shank Type Machining :Weldon Flat, End Mill Style :Square, Number of Flutes :4, End Mill Application :Roughing/Finishing, Drilling Tool Configuration :Individual, End Mill Cutting Type :Center Cutting, List Number :239, Material Grade Machining :C2 Micrograin, Primary Material Application :Cast Iron; Hardened Steel; Stainless Steel; Steel, Primary Material Application ISO Code :H; K; M; P, UNSPSC :23172005, Country of Origin :USA (subject to change), Material Applications :Carbon Steel; Prehardened Steel; Steel, Helix Angle :30 °, Cutting Direction :Right Hand, Neck Length :0 in, Neck Dia :0 in,

+ Add to Cart
product-img product-img

19LV30 | Carbide Double-End Square End Mills

$41.09

The bright finish on these end mills provides a smooth, polished surface. Roughing/finishing end mills remove large amounts of material and create a smooth finish on the workpiece at the same time. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart
product-img product-img

19LV31 | Carbide Double-End Square End Mills

$51.59

id :11754, Mfr Model :239-001033, Material Machining :Carbide, Finish Machining :AlTiN, Measurement System :Fractional Inch, Milling Dia :7/32 in, Length of Cut :9/16 in, Overall Length :3-1/2 in, Shank Dia :3/8 in, Shank Type Machining :Weldon Flat, End Mill Style :Square, Number of Flutes :4, End Mill Application :Roughing/Finishing, Drilling Tool Configuration :Individual, End Mill Cutting Type :Center Cutting, List Number :239, Material Grade Machining :C2 Micrograin, Primary Material Application :Cast Iron; Hardened Steel; Stainless Steel; Steel, Primary Material Application ISO Code :H; K; M; P, UNSPSC :23172005, Country of Origin :USA (subject to change), Material Applications :Carbon Steel; Prehardened Steel; Steel, Helix Angle :30 °, Cutting Direction :Right Hand, Neck Length :0 in, Neck Dia :0 in,

+ Add to Cart
product-img product-img

19LV32 | Carbide Double-End Square End Mills

$41.21

The bright finish on these end mills provides a smooth, polished surface. Roughing/finishing end mills remove large amounts of material and create a smooth finish on the workpiece at the same time. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart
product-img product-img

19LV33 | Carbide Double-End Square End Mills

$51.53

id :11756, Mfr Model :239-001043, Material Machining :Carbide, Finish Machining :AlTiN, Measurement System :Fractional Inch, Milling Dia :1/4 in, Length of Cut :5/8 in, Overall Length :3-1/2 in, Shank Dia :3/8 in, Shank Type Machining :Weldon Flat, End Mill Style :Square, Number of Flutes :4, End Mill Application :Roughing/Finishing, Drilling Tool Configuration :Individual, End Mill Cutting Type :Center Cutting, List Number :239, Material Grade Machining :C2 Micrograin, Primary Material Application :Cast Iron; Hardened Steel; Stainless Steel; Steel, Primary Material Application ISO Code :H; K; M; P, UNSPSC :23172005, Country of Origin :USA (subject to change), Material Applications :Carbon Steel; Prehardened Steel; Steel, Helix Angle :30 °, Cutting Direction :Right Hand, Neck Length :0 in, Neck Dia :0 in,

+ Add to Cart
product-img product-img

19LV34 | Carbide Double-End Square End Mills

$40.66

The bright finish on these end mills provides a smooth, polished surface. Roughing/finishing end mills remove large amounts of material and create a smooth finish on the workpiece at the same time. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart
product-img product-img

19LV35 | Carbide Double-End Square End Mills

$49.64

id :11758, Mfr Model :239-001053, Material Machining :Carbide, Finish Machining :AlTiN, Measurement System :Fractional Inch, Milling Dia :9/32 in, Length of Cut :11/16 in, Overall Length :3-1/2 in, Shank Dia :3/8 in, Shank Type Machining :Weldon Flat, End Mill Style :Square, Number of Flutes :4, End Mill Application :Roughing/Finishing, Drilling Tool Configuration :Individual, End Mill Cutting Type :Center Cutting, List Number :239, Material Grade Machining :C2 Micrograin, Primary Material Application :Cast Iron; Hardened Steel; Stainless Steel; Steel, Primary Material Application ISO Code :H; K; M; P, UNSPSC :23172005, Country of Origin :USA (subject to change), Material Applications :Carbon Steel; Prehardened Steel; Steel, Helix Angle :30 °, Cutting Direction :Right Hand, Neck Length :0 in, Neck Dia :0 in,

+ Add to Cart
product-img product-img

19LV36 | Carbide Double-End Square End Mills

$41.40

The bright finish on these end mills provides a smooth, polished surface. Roughing/finishing end mills remove large amounts of material and create a smooth finish on the workpiece at the same time. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart
product-img product-img

19LV37 | Carbide Double-End Square End Mills

$51.59

id :11760, Mfr Model :239-001063, Material Machining :Carbide, Finish Machining :AlTiN, Measurement System :Fractional Inch, Milling Dia :5/16 in, Length of Cut :3/4 in, Overall Length :3-1/2 in, Shank Dia :3/8 in, Shank Type Machining :Weldon Flat, End Mill Style :Square, Number of Flutes :4, End Mill Application :Roughing/Finishing, Drilling Tool Configuration :Individual, End Mill Cutting Type :Center Cutting, List Number :239, Material Grade Machining :C2 Micrograin, Primary Material Application :Cast Iron; Hardened Steel; Stainless Steel; Steel, Primary Material Application ISO Code :H; K; M; P, UNSPSC :23172005, Country of Origin :USA (subject to change), Material Applications :Carbon Steel; Prehardened Steel; Steel, Helix Angle :30 °, Cutting Direction :Right Hand, Neck Length :0 in, Neck Dia :0 in,

+ Add to Cart
product-img product-img

19LV40 | Carbide Double-End Square End Mills

$37.58

The bright finish on these end mills provides a smooth, polished surface. Roughing/finishing end mills remove large amounts of material and create a smooth finish on the workpiece at the same time. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart
product-img product-img

19LV41 | Carbide Double-End Square End Mills

$46.49

id :11762, Mfr Model :239-001083, Material Machining :Carbide, Finish Machining :AlTiN, Measurement System :Fractional Inch, Milling Dia :3/8 in, Length of Cut :3/4 in, Overall Length :3-1/2 in, Shank Dia :3/8 in, Shank Type Machining :Weldon Flat, End Mill Style :Square, Number of Flutes :4, End Mill Application :Roughing/Finishing, Drilling Tool Configuration :Individual, End Mill Cutting Type :Center Cutting, List Number :239, Material Grade Machining :C2 Micrograin, Primary Material Application :Cast Iron; Hardened Steel; Stainless Steel; Steel, Primary Material Application ISO Code :H; K; M; P, UNSPSC :23172005, Country of Origin :USA (subject to change), Material Applications :Carbon Steel; Prehardened Steel; Steel, Helix Angle :30 °, Cutting Direction :Right Hand, Neck Length :0 in, Neck Dia :0 in,

+ Add to Cart
product-img product-img

19LV42 | Carbide Double-End Square End Mills

$54.51

The bright finish on these end mills provides a smooth, polished surface. Roughing/finishing end mills remove large amounts of material and create a smooth finish on the workpiece at the same time. Double-end end mills have a nose on both their ends and can accomplish more milling tasks than single-end end mills before they need to be replaced.

+ Add to Cart
× Success！success