Product catagories

Search Products

FilterClear All

Inquiry

Carbide-Tipped Jobber-Length Drill Bits

product-img product-img

827EP0 | Carbide-Tipped Jobber-Length Drill Bits

$9.31

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

41AE68 | Carbide-Tipped Jobber-Length Drill Bits

$11.07

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

41AE71 | Carbide-Tipped Jobber-Length Drill Bits

$11.07

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

41AE81 | Carbide-Tipped Jobber-Length Drill Bits

$12.89

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

41AE90 | Carbide-Tipped Jobber-Length Drill Bits

$11.81

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

41AF23 | Carbide-Tipped Jobber-Length Drill Bits

$15.55

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

41AF77 | Carbide-Tipped Jobber-Length Drill Bits

$21.88

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

41AF84 | Carbide-Tipped Jobber-Length Drill Bits

$23.12

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

41AG31 | Carbide-Tipped Jobber-Length Drill Bits

$12.29

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

41AG36 | Carbide-Tipped Jobber-Length Drill Bits

$11.74

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

41AG41 | Carbide-Tipped Jobber-Length Drill Bits

$14.32

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

41AG56 | Carbide-Tipped Jobber-Length Drill Bits

$14.46

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

41AG62 | Carbide-Tipped Jobber-Length Drill Bits

$17.26

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

41AG74 | Carbide-Tipped Jobber-Length Drill Bits

$20.15

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

41AG76 | Carbide-Tipped Jobber-Length Drill Bits

$19.30

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

41AG98 | Carbide-Tipped Jobber-Length Drill Bits

$28.34

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

41AJ68 | Carbide-Tipped Jobber-Length Drill Bits

$20.38

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

1V997 | Carbide-Tipped Jobber-Length Drill Bits

$18.74

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

1W004 | Carbide-Tipped Jobber-Length Drill Bits

$19.70

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

1W008 | Carbide-Tipped Jobber-Length Drill Bits

$20.75

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

1W012 | Carbide-Tipped Jobber-Length Drill Bits

$22.90

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

1W016 | Carbide-Tipped Jobber-Length Drill Bits

$24.32

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

1W020 | Carbide-Tipped Jobber-Length Drill Bits

$28.46

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

1W024 | Carbide-Tipped Jobber-Length Drill Bits

$31.75

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

1W028 | Carbide-Tipped Jobber-Length Drill Bits

$33.36

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

1W032 | Carbide-Tipped Jobber-Length Drill Bits

$34.40

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

1W037 | Carbide-Tipped Jobber-Length Drill Bits

$38.86

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

1W041 | Carbide-Tipped Jobber-Length Drill Bits

$42.59

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

1W045 | Carbide-Tipped Jobber-Length Drill Bits

$52.36

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
product-img product-img

1W049 | Carbide-Tipped Jobber-Length Drill Bits

$53.03

These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits have a bright finish that is not affected when their cutting edges are resharpened. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

+ Add to Cart
× Success！success