Product catagories

Search Products

FilterClear All

Inquiry

Finishing Cobalt Square End Mills

product-img product-img

55FY66 | Finishing Cobalt Square End Mills

$78.21

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

55FY70 | Finishing Cobalt Square End Mills

$63.98

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

55FY71 | Finishing Cobalt Square End Mills

$102.97

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55FY93 | Finishing Cobalt Square End Mills

$52.93

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

55FY94 | Finishing Cobalt Square End Mills

$59.99

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

55FY95 | Finishing Cobalt Square End Mills

$66.85

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55FY96 | Finishing Cobalt Square End Mills

$54.72

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

55FZ11 | Finishing Cobalt Square End Mills

$67.67

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55FZ12 | Finishing Cobalt Square End Mills

$54.72

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

55FZ13 | Finishing Cobalt Square End Mills

$66.85

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55FZ14 | Finishing Cobalt Square End Mills

$54.72

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

55FZ16 | Finishing Cobalt Square End Mills

$54.72

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

55FZ17 | Finishing Cobalt Square End Mills

$90.02

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55FZ19 | Finishing Cobalt Square End Mills

$70.84

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

55FZ20 | Finishing Cobalt Square End Mills

$109.47

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55FZ22 | Finishing Cobalt Square End Mills

$72.73

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

55FZ23 | Finishing Cobalt Square End Mills

$112.23

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55FZ24 | Finishing Cobalt Square End Mills

$102.50

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

55FZ25 | Finishing Cobalt Square End Mills

$70.09

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55FZ27 | Finishing Cobalt Square End Mills

$70.09

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55FZ32 | Finishing Cobalt Square End Mills

$76.88

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55FZ33 | Finishing Cobalt Square End Mills

$70.40

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

55FZ34 | Finishing Cobalt Square End Mills

$71.97

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

55FZ35 | Finishing Cobalt Square End Mills

$112.23

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55FZ40 | Finishing Cobalt Square End Mills

$76.66

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

55FZ43 | Finishing Cobalt Square End Mills

$87.37

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

55FZ46 | Finishing Cobalt Square End Mills

$87.37

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

55FZ47 | Finishing Cobalt Square End Mills

$128.71

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55FZ94 | Finishing Cobalt Square End Mills

$71.27

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

55FZ95 | Finishing Cobalt Square End Mills

$79.55

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
× Success！success