Search Products

FilterClear All

Inquiry

General Purpose Finishing Coated Carbide Corner-Radius End Mills

55FG23 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$173.51

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart

55FG28 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$85.22

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

55FG29 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$87.15

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

55FG30 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$89.05

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

55FG31 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$83.18

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

55FG32 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$91.05

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

55FG33 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$85.06

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

55FG34 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$89.11

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

55FG35 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$91.05

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

55FG36 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$111.19

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

55FG37 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$106.13

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

55FG38 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$111.19

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

55FG39 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$106.13

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

55FG40 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$111.19

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

55FG41 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$115.69

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

55FG42 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$121.20

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

55FG43 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$115.69

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

55FG44 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$115.69

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

55FG45 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$123.85

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

55FG46 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$100.29

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

55FG47 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$103.29

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

55FG48 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$105.54

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

55FG49 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$103.29

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56FZ90 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$417.83

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56FZ91 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$417.83

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56FZ92 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$417.83

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56FZ93 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$398.82

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56FZ94 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$417.83

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56FZ95 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$472.19

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart

56FZ96 | General Purpose Finishing Coated Carbide Corner-Radius End Mills

$472.19

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart
× Success!success