Product catagories

Search Products

FilterClear All

Inquiry

General Purpose Finishing Coated High-Speed Steel Square End Mills

product-img product-img

438R58 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$138.93

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

438R60 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$174.97

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

438R61 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$207.59

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

438T65 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$5.29

Two-flute end mills help maximize chip clearance. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

438T68 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$8.96

Two-flute end mills help maximize chip clearance. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

438T70 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$22.24

Two-flute end mills help maximize chip clearance. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

438T75 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$17.36

Two-flute end mills help maximize chip clearance. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

438T80 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$39.48

Two-flute end mills help maximize chip clearance. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

438T85 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$26.18

Two-flute end mills help maximize chip clearance. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

438T86 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$7.10

Two-flute end mills help maximize chip clearance. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

438T90 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$12.27

Two-flute end mills help maximize chip clearance. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

438T91 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$24.43

Two-flute end mills help maximize chip clearance. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

438U02 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$45.41

Two-flute end mills help maximize chip clearance. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55GE96 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$15.24

Two-flute end mills help maximize chip clearance. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

55GE99 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$16.70

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

55GF67 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$17.83

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55GF68 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$16.03

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

55GF89 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$17.06

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55GF90 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$15.62

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

55GG32 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$17.45

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55GG33 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$15.59

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

55GH01 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$17.83

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55GH10 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$17.06

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55GH20 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$17.06

Two-flute end mills help maximize chip clearance. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55GH21 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$14.87

Two-flute end mills help maximize chip clearance. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

55GH24 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$21.73

Two-flute end mills help maximize chip clearance. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

55GH29 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$17.83

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55GH30 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$16.12

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

55GH32 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$22.77

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

55GH33 | General Purpose Finishing Coated High-Speed Steel Square End Mills

$20.50

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
× Success！success