Product catagories

Search Products

FilterClear All

Inquiry

General Purpose Roughing Carbide Corner-Radius End Mills

product-img product-img

48KZ59 | General Purpose Roughing Carbide Corner-Radius End Mills

$34.58

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

48KZ60 | General Purpose Roughing Carbide Corner-Radius End Mills

$49.12

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

48KZ61 | General Purpose Roughing Carbide Corner-Radius End Mills

$64.09

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

48KZ62 | General Purpose Roughing Carbide Corner-Radius End Mills

$84.67

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

48KZ63 | General Purpose Roughing Carbide Corner-Radius End Mills

$131.23

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

48KZ64 | General Purpose Roughing Carbide Corner-Radius End Mills

$186.79

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

48KZ66 | General Purpose Roughing Carbide Corner-Radius End Mills

$39.03

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48LP15 | General Purpose Roughing Carbide Corner-Radius End Mills

$57.98

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48LP17 | General Purpose Roughing Carbide Corner-Radius End Mills

$58.12

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48LP18 | General Purpose Roughing Carbide Corner-Radius End Mills

$57.97

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48LP20 | General Purpose Roughing Carbide Corner-Radius End Mills

$64.75

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48LP21 | General Purpose Roughing Carbide Corner-Radius End Mills

$85.64

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48LP22 | General Purpose Roughing Carbide Corner-Radius End Mills

$115.70

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48LP23 | General Purpose Roughing Carbide Corner-Radius End Mills

$149.27

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48LP24 | General Purpose Roughing Carbide Corner-Radius End Mills

$176.15

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48LP25 | General Purpose Roughing Carbide Corner-Radius End Mills

$218.03

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

54LF25 | General Purpose Roughing Carbide Corner-Radius End Mills

$142.60

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

54LF26 | General Purpose Roughing Carbide Corner-Radius End Mills

$214.61

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

54LF27 | General Purpose Roughing Carbide Corner-Radius End Mills

$240.74

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

54LF28 | General Purpose Roughing Carbide Corner-Radius End Mills

$273.38

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

54LF29 | General Purpose Roughing Carbide Corner-Radius End Mills

$411.02

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

287NV4 | General Purpose Roughing Carbide Corner-Radius End Mills

$42.92

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

287NV5 | General Purpose Roughing Carbide Corner-Radius End Mills

$50.59

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

287NV6 | General Purpose Roughing Carbide Corner-Radius End Mills

$57.74

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

287NV7 | General Purpose Roughing Carbide Corner-Radius End Mills

$75.98

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

287NV8 | General Purpose Roughing Carbide Corner-Radius End Mills

$126.49

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

287NV9 | General Purpose Roughing Carbide Corner-Radius End Mills

$151.94

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

287NW0 | General Purpose Roughing Carbide Corner-Radius End Mills

$158.14

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

287NW1 | General Purpose Roughing Carbide Corner-Radius End Mills

$242.91

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

287NW2 | General Purpose Roughing Carbide Corner-Radius End Mills

$249.66

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
× Success！success