Product catagories

Search Products

FilterClear All

Inquiry

General Purpose Roughing/Finishing Carbide Ball End Mills

product-img product-img

45XU11 | General Purpose Roughing/Finishing Carbide Ball End Mills

$11.23

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XU12 | General Purpose Roughing/Finishing Carbide Ball End Mills

$14.41

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XU13 | General Purpose Roughing/Finishing Carbide Ball End Mills

$14.41

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XU14 | General Purpose Roughing/Finishing Carbide Ball End Mills

$22.76

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XU15 | General Purpose Roughing/Finishing Carbide Ball End Mills

$22.76

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XU16 | General Purpose Roughing/Finishing Carbide Ball End Mills

$33.44

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XU17 | General Purpose Roughing/Finishing Carbide Ball End Mills

$33.44

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XU18 | General Purpose Roughing/Finishing Carbide Ball End Mills

$33.44

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XU19 | General Purpose Roughing/Finishing Carbide Ball End Mills

$38.11

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XU20 | General Purpose Roughing/Finishing Carbide Ball End Mills

$38.11

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XU21 | General Purpose Roughing/Finishing Carbide Ball End Mills

$39.79

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XU22 | General Purpose Roughing/Finishing Carbide Ball End Mills

$98.15

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XU23 | General Purpose Roughing/Finishing Carbide Ball End Mills

$146.17

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XU50 | General Purpose Roughing/Finishing Carbide Ball End Mills

$7.06

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XU52 | General Purpose Roughing/Finishing Carbide Ball End Mills

$7.61

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XU53 | General Purpose Roughing/Finishing Carbide Ball End Mills

$7.95

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XU54 | General Purpose Roughing/Finishing Carbide Ball End Mills

$9.55

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XU55 | General Purpose Roughing/Finishing Carbide Ball End Mills

$10.39

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XU56 | General Purpose Roughing/Finishing Carbide Ball End Mills

$10.83

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XU57 | General Purpose Roughing/Finishing Carbide Ball End Mills

$10.83

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XU58 | General Purpose Roughing/Finishing Carbide Ball End Mills

$9.29

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XU59 | General Purpose Roughing/Finishing Carbide Ball End Mills

$10.50

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XU60 | General Purpose Roughing/Finishing Carbide Ball End Mills

$11.08

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XU61 | General Purpose Roughing/Finishing Carbide Ball End Mills

$11.06

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XU62 | General Purpose Roughing/Finishing Carbide Ball End Mills

$13.11

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XU63 | General Purpose Roughing/Finishing Carbide Ball End Mills

$14.07

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XU64 | General Purpose Roughing/Finishing Carbide Ball End Mills

$14.41

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XU65 | General Purpose Roughing/Finishing Carbide Ball End Mills

$15.04

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XU66 | General Purpose Roughing/Finishing Carbide Ball End Mills

$13.08

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XU67 | General Purpose Roughing/Finishing Carbide Ball End Mills

$14.36

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
× Success！success