Product catagories

Search Products

FilterClear All

Inquiry

General Purpose Roughing/Finishing Carbide Ball End Mills

product-img product-img

45XU68 | General Purpose Roughing/Finishing Carbide Ball End Mills

$13.81

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XU69 | General Purpose Roughing/Finishing Carbide Ball End Mills

$14.00

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XU70 | General Purpose Roughing/Finishing Carbide Ball End Mills

$15.70

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XU71 | General Purpose Roughing/Finishing Carbide Ball End Mills

$19.44

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XU72 | General Purpose Roughing/Finishing Carbide Ball End Mills

$20.20

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XU73 | General Purpose Roughing/Finishing Carbide Ball End Mills

$21.05

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XU74 | General Purpose Roughing/Finishing Carbide Ball End Mills

$18.31

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XU75 | General Purpose Roughing/Finishing Carbide Ball End Mills

$18.39

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XU76 | General Purpose Roughing/Finishing Carbide Ball End Mills

$19.15

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XU77 | General Purpose Roughing/Finishing Carbide Ball End Mills

$19.15

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XU78 | General Purpose Roughing/Finishing Carbide Ball End Mills

$21.31

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XU79 | General Purpose Roughing/Finishing Carbide Ball End Mills

$20.43

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XU80 | General Purpose Roughing/Finishing Carbide Ball End Mills

$20.66

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XU81 | General Purpose Roughing/Finishing Carbide Ball End Mills

$21.64

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XU82 | General Purpose Roughing/Finishing Carbide Ball End Mills

$26.66

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XU83 | General Purpose Roughing/Finishing Carbide Ball End Mills

$32.27

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XU84 | General Purpose Roughing/Finishing Carbide Ball End Mills

$33.69

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XU85 | General Purpose Roughing/Finishing Carbide Ball End Mills

$32.48

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XU86 | General Purpose Roughing/Finishing Carbide Ball End Mills

$37.73

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XU87 | General Purpose Roughing/Finishing Carbide Ball End Mills

$36.16

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XU88 | General Purpose Roughing/Finishing Carbide Ball End Mills

$37.55

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XU89 | General Purpose Roughing/Finishing Carbide Ball End Mills

$39.17

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XU90 | General Purpose Roughing/Finishing Carbide Ball End Mills

$52.02

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XU91 | General Purpose Roughing/Finishing Carbide Ball End Mills

$57.07

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XU92 | General Purpose Roughing/Finishing Carbide Ball End Mills

$59.99

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XU93 | General Purpose Roughing/Finishing Carbide Ball End Mills

$59.99

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XU94 | General Purpose Roughing/Finishing Carbide Ball End Mills

$60.44

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XU95 | General Purpose Roughing/Finishing Carbide Ball End Mills

$62.80

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XU96 | General Purpose Roughing/Finishing Carbide Ball End Mills

$65.56

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XU97 | General Purpose Roughing/Finishing Carbide Ball End Mills

$65.56

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
× Success！success