Search Products

FilterClear All

Inquiry

General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

19LE42 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$94.39

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LE45 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$88.14

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LE46 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$93.23

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LE47 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$86.18

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LE48 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$94.07

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LE49 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$86.18

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LE50 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$94.39

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LE51 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$88.14

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LE52 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$92.60

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LE53 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$84.62

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LE54 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$95.29

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LE55 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$84.62

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LE56 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$92.60

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LE57 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$88.14

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LE58 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$140.31

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LE59 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$155.73

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LE60 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$138.01

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LE61 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$155.73

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LE64 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$138.01

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LE65 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$155.73

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LE66 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$138.01

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LE67 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$155.73

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LE68 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$140.31

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LE69 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$158.45

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LE70 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$140.44

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LE71 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$158.45

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LE72 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$138.01

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LE73 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$155.73

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LE74 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$138.01

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LE75 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$155.73

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
× Success!success