Search Products

FilterClear All

Inquiry

General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

45XH24 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$28.41

The TiCN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

45XH25 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$32.39

The TiN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

45XH26 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$33.64

The TiCN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

45XH27 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$32.39

The TiN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

45XH28 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$33.64

The TiCN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

45XH31 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$32.39

The TiN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

45XH32 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$33.64

The TiCN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

45XH33 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$32.39

The TiN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

45XH34 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$33.64

The TiCN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

45XH35 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$32.39

The TiN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

45XH36 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$33.64

The TiCN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

45XH37 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$32.39

The TiN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

45XH38 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$33.64

The TiCN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

45XH39 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$32.39

The TiN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

45XH40 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$33.64

The TiCN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

45XH41 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$55.03

The TiN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

45XH42 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$57.49

The TiCN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

45XH43 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$55.03

The TiN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

45XH44 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$57.49

The TiCN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

45XH47 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$55.03

The TiN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

45XH48 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$57.49

The TiCN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

45XH49 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$55.03

The TiN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

45XH50 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$57.49

The TiCN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

45XH51 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$55.03

The TiN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

45XH52 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$57.49

The TiCN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

45XH53 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$55.03

The TiN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

45XH54 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$57.49

The TiCN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

45XH55 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$55.03

The TiN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart

45XH56 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$57.49

The TiCN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

45XH57 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$77.87

The TiN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
× Success!success