Product catagories

Search Products

FilterClear All

Inquiry

General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

product-img product-img

45XM30 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$127.21

The TiN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XM31 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$129.69

The TiCN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XM32 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$127.21

The TiN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XM33 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$129.69

The TiCN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XM34 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$127.21

The TiN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XM35 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$129.69

The TiCN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XM36 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$133.18

The TiN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XM37 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$129.69

The TiCN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XM38 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$127.21

The TiN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XM39 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$129.69

The TiCN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XM40 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$127.21

The TiN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XM41 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$129.69

The TiCN coating on these roughing/finishing carbide corner-radius end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

48HY35 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$38.84

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

48HY36 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$57.36

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

48HY38 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$90.95

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

48HY44 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$228.35

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

48HY45 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$258.08

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

48HY46 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$319.72

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

19LH28 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$28.41

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LH29 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$28.34

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LH30 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$28.41

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LH31 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$28.34

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LH32 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$28.41

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LH33 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$28.34

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LH34 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$28.41

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LH35 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$35.31

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LH36 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$41.24

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LH37 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$35.31

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

19LH38 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$40.20

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

19LH41 | General Purpose Roughing/Finishing Carbide Corner-Radius End Mills

$33.94

The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
× Success！success