Product catagories

Search Products

FilterClear All

Inquiry

General Purpose Roughing/Finishing Carbide Square End Mills

product-img product-img

45XJ61 | General Purpose Roughing/Finishing Carbide Square End Mills

$42.12

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XJ62 | General Purpose Roughing/Finishing Carbide Square End Mills

$48.92

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XJ63 | General Purpose Roughing/Finishing Carbide Square End Mills

$58.15

The TiN coating on these carbide end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XJ64 | General Purpose Roughing/Finishing Carbide Square End Mills

$59.99

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XJ65 | General Purpose Roughing/Finishing Carbide Square End Mills

$61.29

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XJ66 | General Purpose Roughing/Finishing Carbide Square End Mills

$72.58

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XJ67 | General Purpose Roughing/Finishing Carbide Square End Mills

$80.28

The TiN coating on these carbide end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XJ68 | General Purpose Roughing/Finishing Carbide Square End Mills

$87.79

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XJ69 | General Purpose Roughing/Finishing Carbide Square End Mills

$84.18

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XJ70 | General Purpose Roughing/Finishing Carbide Square End Mills

$111.57

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XJ71 | General Purpose Roughing/Finishing Carbide Square End Mills

$122.55

The TiN coating on these carbide end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XJ72 | General Purpose Roughing/Finishing Carbide Square End Mills

$128.86

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XJ73 | General Purpose Roughing/Finishing Carbide Square End Mills

$128.86

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XJ74 | General Purpose Roughing/Finishing Carbide Square End Mills

$135.11

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

45XJ75 | General Purpose Roughing/Finishing Carbide Square End Mills

$133.20

The TiN coating on these carbide end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XJ76 | General Purpose Roughing/Finishing Carbide Square End Mills

$136.13

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XJ77 | General Purpose Roughing/Finishing Carbide Square End Mills

$136.13

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XJ78 | General Purpose Roughing/Finishing Carbide Square End Mills

$13.46

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XJ79 | General Purpose Roughing/Finishing Carbide Square End Mills

$14.85

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

45XJ92 | General Purpose Roughing/Finishing Carbide Square End Mills

$6.97

The TiN coating on these carbide end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XJ93 | General Purpose Roughing/Finishing Carbide Square End Mills

$7.51

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XJ96 | General Purpose Roughing/Finishing Carbide Square End Mills

$6.41

The TiN coating on these carbide end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XJ97 | General Purpose Roughing/Finishing Carbide Square End Mills

$6.97

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XJ98 | General Purpose Roughing/Finishing Carbide Square End Mills

$9.62

The TiN coating on these carbide end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XJ99 | General Purpose Roughing/Finishing Carbide Square End Mills

$10.15

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XK01 | General Purpose Roughing/Finishing Carbide Square End Mills

$10.30

The TiN coating on these carbide end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XK02 | General Purpose Roughing/Finishing Carbide Square End Mills

$10.15

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

45XK03 | General Purpose Roughing/Finishing Carbide Square End Mills

$9.50

The TiN coating on these carbide end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XK04 | General Purpose Roughing/Finishing Carbide Square End Mills

$9.27

The TiN coating on these carbide end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

45XK05 | General Purpose Roughing/Finishing Carbide Square End Mills

$10.07

The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
× Success！success