Product catagories

Search Products

FilterClear All

Inquiry

General Purpose Roughing/Finishing Carbide Square End Mills

product-img product-img

789LE5 | General Purpose Roughing/Finishing Carbide Square End Mills

$81.52

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

789LE6 | General Purpose Roughing/Finishing Carbide Square End Mills

$108.33

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

789LE7 | General Purpose Roughing/Finishing Carbide Square End Mills

$137.98

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

789LE8 | General Purpose Roughing/Finishing Carbide Square End Mills

$148.08

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

789LE9 | General Purpose Roughing/Finishing Carbide Square End Mills

$257.50

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

789LN6 | General Purpose Roughing/Finishing Carbide Square End Mills

$16.61

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

789LN7 | General Purpose Roughing/Finishing Carbide Square End Mills

$16.61

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

789LN8 | General Purpose Roughing/Finishing Carbide Square End Mills

$12.14

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

789LN9 | General Purpose Roughing/Finishing Carbide Square End Mills

$12.14

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

789LP0 | General Purpose Roughing/Finishing Carbide Square End Mills

$12.14

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

789LP1 | General Purpose Roughing/Finishing Carbide Square End Mills

$17.23

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

789LP2 | General Purpose Roughing/Finishing Carbide Square End Mills

$18.52

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

789LP3 | General Purpose Roughing/Finishing Carbide Square End Mills

$18.88

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

789LP4 | General Purpose Roughing/Finishing Carbide Square End Mills

$17.74

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

789LP5 | General Purpose Roughing/Finishing Carbide Square End Mills

$17.74

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

789LP6 | General Purpose Roughing/Finishing Carbide Square End Mills

$20.74

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

789LP7 | General Purpose Roughing/Finishing Carbide Square End Mills

$32.11

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

789LP9 | General Purpose Roughing/Finishing Carbide Square End Mills

$36.44

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

789LR1 | General Purpose Roughing/Finishing Carbide Square End Mills

$47.21

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

789LR2 | General Purpose Roughing/Finishing Carbide Square End Mills

$37.63

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

789LR4 | General Purpose Roughing/Finishing Carbide Square End Mills

$61.47

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

789LR5 | General Purpose Roughing/Finishing Carbide Square End Mills

$96.97

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

789LR6 | General Purpose Roughing/Finishing Carbide Square End Mills

$110.75

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

789LR7 | General Purpose Roughing/Finishing Carbide Square End Mills

$141.41

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

789LR8 | General Purpose Roughing/Finishing Carbide Square End Mills

$175.44

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

789LR9 | General Purpose Roughing/Finishing Carbide Square End Mills

$254.70

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

14F943 | General Purpose Roughing/Finishing Carbide Square End Mills

$20.59

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

14F944 | General Purpose Roughing/Finishing Carbide Square End Mills

$16.90

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

14F945 | General Purpose Roughing/Finishing Carbide Square End Mills

$19.19

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

14F946 | General Purpose Roughing/Finishing Carbide Square End Mills

$18.20

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
× Success！success