Search Products

FilterClear All

Inquiry

General Purpose Roughing/Finishing Carbide Square End Mills

19LL78 | General Purpose Roughing/Finishing Carbide Square End Mills

$91.31

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LL79 | General Purpose Roughing/Finishing Carbide Square End Mills

$119.15

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LL80 | General Purpose Roughing/Finishing Carbide Square End Mills

$150.01

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LL81 | General Purpose Roughing/Finishing Carbide Square End Mills

$125.36

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LL82 | General Purpose Roughing/Finishing Carbide Square End Mills

$153.38

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LL84 | General Purpose Roughing/Finishing Carbide Square End Mills

$232.86

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LL85 | General Purpose Roughing/Finishing Carbide Square End Mills

$279.78

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LL86 | General Purpose Roughing/Finishing Carbide Square End Mills

$265.58

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LL87 | General Purpose Roughing/Finishing Carbide Square End Mills

$321.08

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LL88 | General Purpose Roughing/Finishing Carbide Square End Mills

$132.56

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LL89 | General Purpose Roughing/Finishing Carbide Square End Mills

$142.90

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LL90 | General Purpose Roughing/Finishing Carbide Square End Mills

$216.86

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LL91 | General Purpose Roughing/Finishing Carbide Square End Mills

$248.42

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

35CN25 | General Purpose Roughing/Finishing Carbide Square End Mills

$265.91

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35CN27 | General Purpose Roughing/Finishing Carbide Square End Mills

$25.84

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35CN28 | General Purpose Roughing/Finishing Carbide Square End Mills

$30.87

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35CN29 | General Purpose Roughing/Finishing Carbide Square End Mills

$30.63

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35CN30 | General Purpose Roughing/Finishing Carbide Square End Mills

$37.88

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35CN31 | General Purpose Roughing/Finishing Carbide Square End Mills

$40.28

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35CN32 | General Purpose Roughing/Finishing Carbide Square End Mills

$62.24

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35CN33 | General Purpose Roughing/Finishing Carbide Square End Mills

$59.99

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35CN35 | General Purpose Roughing/Finishing Carbide Square End Mills

$93.79

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35CN37 | General Purpose Roughing/Finishing Carbide Square End Mills

$130.13

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35CN38 | General Purpose Roughing/Finishing Carbide Square End Mills

$238.81

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35CN77 | General Purpose Roughing/Finishing Carbide Square End Mills

$7.45

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35CN78 | General Purpose Roughing/Finishing Carbide Square End Mills

$9.26

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart

35CN79 | General Purpose Roughing/Finishing Carbide Square End Mills

$11.53

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35CN80 | General Purpose Roughing/Finishing Carbide Square End Mills

$13.78

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart

35CN81 | General Purpose Roughing/Finishing Carbide Square End Mills

$11.53

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

35CN82 | General Purpose Roughing/Finishing Carbide Square End Mills

$13.18

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
× Success!success