Search Products

FilterClear All

Inquiry

General Purpose Roughing/Finishing Carbide Square End Mills

19LD02 | General Purpose Roughing/Finishing Carbide Square End Mills

$18.12

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LD03 | General Purpose Roughing/Finishing Carbide Square End Mills

$22.73

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LD04 | General Purpose Roughing/Finishing Carbide Square End Mills

$30.01

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LD05 | General Purpose Roughing/Finishing Carbide Square End Mills

$22.44

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LD06 | General Purpose Roughing/Finishing Carbide Square End Mills

$27.93

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LD07 | General Purpose Roughing/Finishing Carbide Square End Mills

$28.52

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LD08 | General Purpose Roughing/Finishing Carbide Square End Mills

$36.98

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LD09 | General Purpose Roughing/Finishing Carbide Square End Mills

$28.79

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LD10 | General Purpose Roughing/Finishing Carbide Square End Mills

$35.93

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LD11 | General Purpose Roughing/Finishing Carbide Square End Mills

$45.31

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LD12 | General Purpose Roughing/Finishing Carbide Square End Mills

$57.14

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LD13 | General Purpose Roughing/Finishing Carbide Square End Mills

$60.56

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LD14 | General Purpose Roughing/Finishing Carbide Square End Mills

$74.86

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LD15 | General Purpose Roughing/Finishing Carbide Square End Mills

$80.00

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LD16 | General Purpose Roughing/Finishing Carbide Square End Mills

$94.68

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LD17 | General Purpose Roughing/Finishing Carbide Square End Mills

$96.40

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LD18 | General Purpose Roughing/Finishing Carbide Square End Mills

$107.77

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LD19 | General Purpose Roughing/Finishing Carbide Square End Mills

$110.26

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LD20 | General Purpose Roughing/Finishing Carbide Square End Mills

$128.22

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LD22 | General Purpose Roughing/Finishing Carbide Square End Mills

$124.10

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LD23 | General Purpose Roughing/Finishing Carbide Square End Mills

$141.34

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LD25 | General Purpose Roughing/Finishing Carbide Square End Mills

$18.50

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LD26 | General Purpose Roughing/Finishing Carbide Square End Mills

$21.29

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LD27 | General Purpose Roughing/Finishing Carbide Square End Mills

$21.12

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LD28 | General Purpose Roughing/Finishing Carbide Square End Mills

$28.72

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LD29 | General Purpose Roughing/Finishing Carbide Square End Mills

$28.72

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LD30 | General Purpose Roughing/Finishing Carbide Square End Mills

$33.88

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LD31 | General Purpose Roughing/Finishing Carbide Square End Mills

$33.88

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart

19LF01 | General Purpose Roughing/Finishing Carbide Square End Mills

$6.26

Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart

19LF02 | General Purpose Roughing/Finishing Carbide Square End Mills

$7.16

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
× Success!success