Product catagories

Search Products

FilterClear All

Inquiry

General Purpose Spiral-Point Taps

product-img product-img

33YG60 | General Purpose Spiral-Point Taps

$13.54

UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

33YG61 | General Purpose Spiral-Point Taps

$24.07

UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

33YG62 | General Purpose Spiral-Point Taps

$8.23

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YG63 | General Purpose Spiral-Point Taps

$12.85

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

33YG64 | General Purpose Spiral-Point Taps

$8.03

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YG65 | General Purpose Spiral-Point Taps

$12.91

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

33YG66 | General Purpose Spiral-Point Taps

$9.95

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YG67 | General Purpose Spiral-Point Taps

$17.80

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

33YG68 | General Purpose Spiral-Point Taps

$13.42

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

33YG69 | General Purpose Spiral-Point Taps

$11.35

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YG70 | General Purpose Spiral-Point Taps

$17.93

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

33YG71 | General Purpose Spiral-Point Taps

$10.45

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YG73 | General Purpose Spiral-Point Taps

$7.94

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YG74 | General Purpose Spiral-Point Taps

$11.94

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

33YG75 | General Purpose Spiral-Point Taps

$20.41

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YG76 | General Purpose Spiral-Point Taps

$26.99

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

33YG77 | General Purpose Spiral-Point Taps

$20.53

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YG78 | General Purpose Spiral-Point Taps

$26.44

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

33YG79 | General Purpose Spiral-Point Taps

$8.04

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YG80 | General Purpose Spiral-Point Taps

$12.19

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

33YG81 | General Purpose Spiral-Point Taps

$33.87

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YG82 | General Purpose Spiral-Point Taps

$46.81

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

33YG83 | General Purpose Spiral-Point Taps

$11.82

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

33YG84 | General Purpose Spiral-Point Taps

$7.94

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YG85 | General Purpose Spiral-Point Taps

$12.19

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

33YG86 | General Purpose Spiral-Point Taps

$62.83

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

33YG87 | General Purpose Spiral-Point Taps

$16.89

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YG88 | General Purpose Spiral-Point Taps

$19.87

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

33YG89 | General Purpose Spiral-Point Taps

$16.89

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YG90 | General Purpose Spiral-Point Taps

$23.36

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
× Success！success