Search Products

FilterClear All

Inquiry

General Purpose Spiral-Point Taps

407F37 | General Purpose Spiral-Point Taps

$6.69

UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

407F38 | General Purpose Spiral-Point Taps

$7.43

UN fine (UNF) taps have more threads per inch than UN coarse (UNC) taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

407F39 | General Purpose Spiral-Point Taps

$6.86

UN fine (UNF) taps have more threads per inch than UN coarse (UNC) taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

407F40 | General Purpose Spiral-Point Taps

$6.82

UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

407F41 | General Purpose Spiral-Point Taps

$7.58

UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

407F42 | General Purpose Spiral-Point Taps

$7.31

UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

407F43 | General Purpose Spiral-Point Taps

$7.29

UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

407F44 | General Purpose Spiral-Point Taps

$9.71

UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

407F45 | General Purpose Spiral-Point Taps

$13.15

UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

407F46 | General Purpose Spiral-Point Taps

$14.60

UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

407F47 | General Purpose Spiral-Point Taps

$13.16

UN fine (UNF) taps have more threads per inch than UN coarse (UNC) taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

407F48 | General Purpose Spiral-Point Taps

$14.74

UN fine (UNF) taps have more threads per inch than UN coarse (UNC) taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

407F49 | General Purpose Spiral-Point Taps

$15.77

UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

407F50 | General Purpose Spiral-Point Taps

$13.35

UN fine (UNF) taps have more threads per inch than UN coarse (UNC) taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

407F51 | General Purpose Spiral-Point Taps

$29.23

UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

407F53 | General Purpose Spiral-Point Taps

$29.59

UN fine (UNF) taps have more threads per inch than UN coarse (UNC) taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

407F54 | General Purpose Spiral-Point Taps

$40.84

UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

407F55 | General Purpose Spiral-Point Taps

$42.56

UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

411M87 | General Purpose Spiral-Point Taps

$51.21

id :12324, Mfr Model :T200-XM101AE-7/16 C150, Thread Size :7/16"-14, Tap Material :High Speed Steel, Tap Finish :Bright (Uncoated), Thread Length :3/4 in, Overall Length :3-29/32 in, Thread Limit :H5, Number of Flutes :3, Tap Length Standard :JIS, Tap Shank Standard :JIS, Primary Material Application :All Materials, Thread Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drill Bit Size :21/32 in, Extended Neck :Yes, Material Grade Machining :M35, Measurement System :Fractional Inch, Primary Material Application ISO Code :K; N; P, Shank Dia :5/32 in, Shank Length :2-1/4 in, Square Size :0.4420 in, Standards :DIN 2184-1/ANSI, Tap Chamfer :Plug, Tap Thread Size :7/16"-14, Threads per Inch :10, Manufacturer Part Number :T200-XM101AE-7/16 C150, UNSPSC :23153305, Country of Origin :India (subject to change), Thread Standard :UNC, Shank Type Machining :Straight, Secondary Material Application :Aluminum; Brass; Bronze; Cast Iron; Copper; Steel, Secondary Material Application ISO Code :K; N; P, Spiral Direction :Neutral, Class of Fit :2B, Thread Pitch :0.70 mm, Min Bore Dia :0.3320 in,

+ Add to Cart

411M91 | General Purpose Spiral-Point Taps

$36.92

id :12325, Mfr Model :T200-XM100AE-5/16 C145, Thread Size :5/16"-18, Tap Material :High Speed Steel, Tap Finish :Fe, Thread Length :11/16 in, Overall Length :3-21/32 in, Thread Limit :H5, Number of Flutes :3, Tap Length Standard :JIS, Tap Shank Standard :JIS, Primary Material Application :All Materials, Thread Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drill Bit Size :21/32 in, Extended Neck :Yes, Material Grade Machining :M35, Measurement System :Fractional Inch, Primary Material Application ISO Code :K; N; P, Shank Dia :5/32 in, Shank Length :2-1/4 in, Square Size :0.4420 in, Standards :DIN 2184-1/ANSI, Tap Chamfer :Plug, Tap Thread Size :5/16"-18, Threads per Inch :10, Manufacturer Part Number :T200-XM100AE-5/16 C145, UNSPSC :27112806, Country of Origin :India (subject to change), Thread Standard :UNC, Shank Type Machining :Straight, Secondary Material Application :Aluminum; Brass; Bronze; Cast Iron; Copper; Steel, Secondary Material Application ISO Code :K; N; P, Spiral Direction :Neutral, Class of Fit :2B, Thread Pitch :0.70 mm, Min Bore Dia :0.3320 in,

+ Add to Cart

411N01 | General Purpose Spiral-Point Taps

$119.05

id :12326, Mfr Model :T200-XM100DB-M24X150B150, Thread Size :M24x1.5, Tap Material :High Speed Steel, Tap Finish :Bright (Uncoated), Thread Length :1-1/16 in, Overall Length :5-1/2 in, Thread Limit :H5, Number of Flutes :4, Tap Length Standard :JIS, Tap Shank Standard :JIS, Primary Material Application :All Materials, Thread Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drill Bit Size :21/32 in, Extended Neck :Yes, Material Grade Machining :M35, Measurement System :Metric, Primary Material Application ISO Code :K; N; P, Shank Dia :11/32 in, Shank Length :2-1/4 in, Square Size :0.4420 in, Standards :DIN 374, Tap Chamfer :Plug, Tap Thread Size :M24x1.50, Threads per Inch :10, Manufacturer Part Number :T200-XM100DB-M24X150B150, UNSPSC :23153305, Country of Origin :India (subject to change), Thread Standard :Metric Fine, Shank Type Machining :Straight, Secondary Material Application :Aluminum; Brass; Bronze; Cast Iron; Copper; Steel, Secondary Material Application ISO Code :K; N; P, Spiral Direction :Neutral, Class of Fit :2B, Thread Pitch :0.70 mm, Min Bore Dia :0.3320 in,

+ Add to Cart

411N13 | General Purpose Spiral-Point Taps

$36.92

id :12327, Mfr Model :T200-XM100AF-5/16 C145, Thread Size :5/16"-24, Tap Material :High Speed Steel, Tap Finish :Fe, Thread Length :11/16 in, Overall Length :3-21/32 in, Thread Limit :H5, Number of Flutes :3, Tap Length Standard :JIS, Tap Shank Standard :JIS, Primary Material Application :All Materials, Thread Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drill Bit Size :21/32 in, Extended Neck :Yes, Material Grade Machining :M35, Measurement System :Fractional Inch, Primary Material Application ISO Code :K; N; P, Shank Dia :5/32 in, Shank Length :2-1/4 in, Square Size :0.4420 in, Standards :DIN 2184-1/ANSI, Tap Chamfer :Plug, Tap Thread Size :5/16"-24, Threads per Inch :10, Manufacturer Part Number :T200-XM100AF-5/16 C145, UNSPSC :23153305, Country of Origin :India (subject to change), Thread Standard :UNF, Shank Type Machining :Straight, Secondary Material Application :Aluminum; Brass; Bronze; Cast Iron; Copper; Steel, Secondary Material Application ISO Code :K; N; P, Spiral Direction :Neutral, Class of Fit :2B, Thread Pitch :0.70 mm, Min Bore Dia :0.3320 in,

+ Add to Cart

411N14 | General Purpose Spiral-Point Taps

$29.05

id :12328, Mfr Model :T200-XM100AE-12-24 C150, Thread Size :#12-24, Tap Material :High Speed Steel, Tap Finish :Bright (Uncoated), Thread Length :1/2 in, Overall Length :3-7/32 in, Thread Limit :H5, Number of Flutes :3, Tap Length Standard :JIS, Tap Shank Standard :JIS, Primary Material Application :All Materials, Thread Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drill Bit Size :21/32 in, Extended Neck :Yes, Material Grade Machining :M35, Measurement System :Pipe, Primary Material Application ISO Code :K; N; P, Shank Dia :7/64 in, Shank Length :2-1/4 in, Square Size :0.4420 in, Standards :DIN 2184-1/ANSI, Tap Chamfer :Plug, Tap Thread Size :#12-24, Threads per Inch :10, Manufacturer Part Number :T200-XM100AE-12-24 C150, UNSPSC :23153305, Country of Origin :India (subject to change), Thread Standard :UNC, Shank Type Machining :Straight, Secondary Material Application :Aluminum; Brass; Bronze; Cast Iron; Copper; Steel, Secondary Material Application ISO Code :K; N; P, Spiral Direction :Neutral, Class of Fit :2B, Thread Pitch :0.70 mm, Min Bore Dia :0.3320 in,

+ Add to Cart

411N25 | General Purpose Spiral-Point Taps

$27.53

id :12329, Mfr Model :T200-XM100AE-10-24 C150, Thread Size :#10-24, Tap Material :High Speed Steel, Tap Finish :Bright (Uncoated), Thread Length :9/16 in, Overall Length :2-13/16 in, Thread Limit :H5, Number of Flutes :3, Tap Length Standard :JIS, Tap Shank Standard :JIS, Primary Material Application :All Materials, Thread Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drill Bit Size :21/32 in, Extended Neck :Yes, Material Grade Machining :M35, Measurement System :Pipe, Primary Material Application ISO Code :K; N; P, Shank Dia :3/32 in, Shank Length :2-1/4 in, Square Size :0.4420 in, Standards :DIN 2184-1/ANSI, Tap Chamfer :Plug, Tap Thread Size :#10-24, Threads per Inch :10, Manufacturer Part Number :T200-XM100AE-10-24 C150, UNSPSC :23153305, Country of Origin :India (subject to change), Thread Standard :UNC, Shank Type Machining :Straight, Secondary Material Application :Aluminum; Brass; Bronze; Cast Iron; Copper; Steel, Secondary Material Application ISO Code :K; N; P, Spiral Direction :Neutral, Class of Fit :2B, Thread Pitch :0.70 mm, Min Bore Dia :0.3320 in,

+ Add to Cart

411P12 | General Purpose Spiral-Point Taps

$135.94

id :12330, Mfr Model :T200-XM101AE-1 C150, Thread Size :1"-8, Tap Material :High Speed Steel, Tap Finish :Bright (Uncoated), Thread Length :1-3/8 in, Overall Length :6-9/32 in, Thread Limit :H5, Number of Flutes :4, Tap Length Standard :JIS, Tap Shank Standard :JIS, Primary Material Application :All Materials, Thread Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drill Bit Size :21/32 in, Extended Neck :Yes, Material Grade Machining :M35, Measurement System :Fractional Inch, Primary Material Application ISO Code :K; N; P, Shank Dia :25/64 in, Shank Length :2-1/4 in, Square Size :0.4420 in, Standards :DIN 2184-1/ANSI, Tap Chamfer :Plug, Tap Thread Size :1"-8, Threads per Inch :10, Manufacturer Part Number :T200-XM101AE-1 C150, UNSPSC :23153305, Country of Origin :India (subject to change), Thread Standard :UNC, Shank Type Machining :Straight, Secondary Material Application :Aluminum; Brass; Bronze; Cast Iron; Copper; Steel, Secondary Material Application ISO Code :K; N; P, Spiral Direction :Neutral, Class of Fit :2B, Thread Pitch :0.70 mm, Min Bore Dia :0.3320 in,

+ Add to Cart

411P21 | General Purpose Spiral-Point Taps

$72.85

id :12331, Mfr Model :T200-XM101AF-5/8 C145, Thread Size :5/8"-18, Tap Material :High Speed Steel, Tap Finish :Fe, Thread Length :13/16 in, Overall Length :3-29/32 in, Thread Limit :H5, Number of Flutes :3, Tap Length Standard :JIS, Tap Shank Standard :JIS, Primary Material Application :All Materials, Thread Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drill Bit Size :21/32 in, Extended Neck :Yes, Material Grade Machining :M35, Measurement System :Fractional Inch, Primary Material Application ISO Code :K; N; P, Shank Dia :15/64 in, Shank Length :2-1/4 in, Square Size :0.4420 in, Standards :DIN 2184-1/ANSI, Tap Chamfer :Plug, Tap Thread Size :5/8"-18, Threads per Inch :10, Manufacturer Part Number :T200-XM101AF-5/8 C145, UNSPSC :23153305, Country of Origin :India (subject to change), Thread Standard :UNF, Shank Type Machining :Straight, Secondary Material Application :Aluminum; Brass; Bronze; Cast Iron; Copper; Steel, Secondary Material Application ISO Code :K; N; P, Spiral Direction :Neutral, Class of Fit :2B, Thread Pitch :0.70 mm, Min Bore Dia :0.3320 in,

+ Add to Cart

411P43 | General Purpose Spiral-Point Taps

$29.75

id :12332, Mfr Model :T200-XM100AF-8-36 C150, Thread Size :#8-36, Tap Material :High Speed Steel, Tap Finish :Bright (Uncoated), Thread Length :1/2 in, Overall Length :2-17/32 in, Thread Limit :H5, Number of Flutes :3, Tap Length Standard :JIS, Tap Shank Standard :JIS, Primary Material Application :All Materials, Thread Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drill Bit Size :21/32 in, Extended Neck :Yes, Material Grade Machining :M35, Measurement System :Pipe, Primary Material Application ISO Code :K; N; P, Shank Dia :5/64 in, Shank Length :2-1/4 in, Square Size :0.4420 in, Standards :DIN 2184-1/ANSI, Tap Chamfer :Plug, Tap Thread Size :#8-36, Threads per Inch :10, Manufacturer Part Number :T200-XM100AF-8-36 C150, UNSPSC :23153305, Country of Origin :India (subject to change), Thread Standard :UNF, Shank Type Machining :Straight, Secondary Material Application :Aluminum; Brass; Bronze; Cast Iron; Copper; Steel, Secondary Material Application ISO Code :K; N; P, Spiral Direction :Neutral, Class of Fit :2B, Thread Pitch :0.70 mm, Min Bore Dia :0.3320 in,

+ Add to Cart

411V97 | General Purpose Spiral-Point Taps

$31.51

id :12333, Mfr Model :T200-XM100AA-M10 C150, Thread Size :M10x1.5, Tap Material :High Speed Steel, Tap Finish :Bright (Uncoated), Thread Length :13/16 in, Overall Length :4-3/32 in, Thread Limit :H5, Number of Flutes :3, Tap Length Standard :JIS, Tap Shank Standard :JIS, Primary Material Application :All Materials, Thread Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drill Bit Size :21/32 in, Extended Neck :Yes, Material Grade Machining :M35, Measurement System :Metric, Primary Material Application ISO Code :K; N; P, Shank Dia :3/16 in, Shank Length :2-1/4 in, Square Size :0.4420 in, Standards :DIN 371/ANSI, Tap Chamfer :Plug, Tap Thread Size :M10x1.50, Threads per Inch :10, Manufacturer Part Number :T200-XM100AA-M10 C150, UNSPSC :23153305, Country of Origin :India (subject to change), Thread Standard :Metric, Shank Type Machining :Straight, Secondary Material Application :Aluminum; Brass; Bronze; Cast Iron; Copper; Steel, Secondary Material Application ISO Code :K; N; P, Spiral Direction :Neutral, Class of Fit :2B, Thread Pitch :0.70 mm, Min Bore Dia :0.3320 in,

+ Add to Cart

411W28 | General Purpose Spiral-Point Taps

$40.00

id :12334, Mfr Model :T200-XM101AA-M12 C150, Thread Size :M12x1.75, Tap Material :High Speed Steel, Tap Finish :Bright (Uncoated), Thread Length :7/8 in, Overall Length :4-5/16 in, Thread Limit :H5, Number of Flutes :3, Tap Length Standard :JIS, Tap Shank Standard :JIS, Primary Material Application :All Materials, Thread Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drill Bit Size :21/32 in, Extended Neck :Yes, Material Grade Machining :M35, Measurement System :Metric, Primary Material Application ISO Code :K; N; P, Shank Dia :11/64 in, Shank Length :2-1/4 in, Square Size :0.4420 in, Standards :DIN 376/ANSI, Tap Chamfer :Plug, Tap Thread Size :M12x1.75, Threads per Inch :10, Manufacturer Part Number :T200-XM101AA-M12 C150, UNSPSC :23153305, Country of Origin :India (subject to change), Thread Standard :Metric, Shank Type Machining :Straight, Secondary Material Application :Aluminum; Brass; Bronze; Cast Iron; Copper; Steel, Secondary Material Application ISO Code :K; N; P, Spiral Direction :Neutral, Class of Fit :2B, Thread Pitch :0.70 mm, Min Bore Dia :0.3320 in,

+ Add to Cart

41VL90 | General Purpose Spiral-Point Taps

$20.53

id :12335, Mfr Model :T200-XM100DA-M4 C150, Thread Size :M4x0.70, Tap Material :High Speed Steel, Tap Finish :Bright (Uncoated), Thread Length :7/16 in, Overall Length :2-17/32 in, Thread Limit :H5, Number of Flutes :3, Tap Length Standard :JIS, Tap Shank Standard :JIS, Primary Material Application :All Materials, Thread Direction :Right Hand, Coolant Fed :Non-Coolant Through, Drill Bit Size :21/32 in, Extended Neck :Yes, Material Grade Machining :M35, Measurement System :Metric, Primary Material Application ISO Code :K; N; P, Shank Dia :11/64 in, Shank Length :2-1/4 in, Square Size :0.4420 in, Standards :DIN 371, Tap Chamfer :Plug, Tap Thread Size :M4-0.70, Threads per Inch :10, Manufacturer Part Number :T200-XM100DA-M4 C150, UNSPSC :23153305, Country of Origin :India (subject to change), Thread Standard :Metric Coarse, Shank Type Machining :Straight, Secondary Material Application :Aluminum; Brass; Bronze; Cast Iron; Copper; Steel, Secondary Material Application ISO Code :K; N; P, Spiral Direction :Neutral, Class of Fit :2B, Thread Pitch :0.70 mm, Min Bore Dia :0.3320 in,

+ Add to Cart
× Success!success