Product catagories

Search Products

FilterClear All

Inquiry

High-Performance Finishing Carbide Square End Mills

product-img product-img

60YC67 | High-Performance Finishing Carbide Square End Mills

$187.33

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

60YC75 | High-Performance Finishing Carbide Square End Mills

$312.13

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

60YD08 | High-Performance Finishing Carbide Square End Mills

$69.52

The ZrN coating on these end mills protects them from wear when milling nonferrous metals. It has a higher oxidation temperature than a TiN coating.

+ Add to Cart
product-img product-img

60YD26 | High-Performance Finishing Carbide Square End Mills

$192.53

The ZrN coating on these end mills protects them from wear when milling nonferrous metals. It has a higher oxidation temperature than a TiN coating.

+ Add to Cart
product-img product-img

60YD34 | High-Performance Finishing Carbide Square End Mills

$316.27

The ZrN coating on these end mills protects them from wear when milling nonferrous metals. It has a higher oxidation temperature than a TiN coating.

+ Add to Cart
product-img product-img

60YD37 | High-Performance Finishing Carbide Square End Mills

$11.66

The ZrN coating on these end mills protects them from wear when milling nonferrous metals. It has a higher oxidation temperature than a TiN coating.

+ Add to Cart
product-img product-img

60YD38 | High-Performance Finishing Carbide Square End Mills

$13.18

The ZrN coating on these end mills protects them from wear when milling nonferrous metals. It has a higher oxidation temperature than a TiN coating.

+ Add to Cart
product-img product-img

60YD39 | High-Performance Finishing Carbide Square End Mills

$14.29

The ZrN coating on these end mills protects them from wear when milling nonferrous metals. It has a higher oxidation temperature than a TiN coating.

+ Add to Cart
product-img product-img

60YD40 | High-Performance Finishing Carbide Square End Mills

$15.83

The ZrN coating on these end mills protects them from wear when milling nonferrous metals. It has a higher oxidation temperature than a TiN coating.

+ Add to Cart
product-img product-img

60YD41 | High-Performance Finishing Carbide Square End Mills

$17.69

The ZrN coating on these end mills protects them from wear when milling nonferrous metals. It has a higher oxidation temperature than a TiN coating.

+ Add to Cart
product-img product-img

2TWC5 | High-Performance Finishing Carbide Square End Mills

$12.13

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

2TWC6 | High-Performance Finishing Carbide Square End Mills

$27.80

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

2TWC7 | High-Performance Finishing Carbide Square End Mills

$31.20

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

2TWC8 | High-Performance Finishing Carbide Square End Mills

$46.22

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

2TWD1 | High-Performance Finishing Carbide Square End Mills

$127.40

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

2TWD4 | High-Performance Finishing Carbide Square End Mills

$245.93

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

2TWD5 | High-Performance Finishing Carbide Square End Mills

$18.07

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

2TWD6 | High-Performance Finishing Carbide Square End Mills

$22.26

Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

2WDJ3 | High-Performance Finishing Carbide Square End Mills

$28.49

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

2WDJ6 | High-Performance Finishing Carbide Square End Mills

$54.22

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

2WDJ7 | High-Performance Finishing Carbide Square End Mills

$68.41

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

2WDL9 | High-Performance Finishing Carbide Square End Mills

$69.18

The diamond coating on these end mills protects them from wear when milling abrasive materials. Diamond-coated end mills are only used for milling nonferrous materials such as aluminum, graphite, copper, and carbon fiber.

+ Add to Cart
product-img product-img

2WDN1 | High-Performance Finishing Carbide Square End Mills

$119.09

The diamond coating on these end mills protects them from wear when milling abrasive materials. Diamond-coated end mills are only used for milling nonferrous materials such as aluminum, graphite, copper, and carbon fiber.

+ Add to Cart
product-img product-img

2WDN2 | High-Performance Finishing Carbide Square End Mills

$153.04

The diamond coating on these end mills protects them from wear when milling abrasive materials. Diamond-coated end mills are only used for milling nonferrous materials such as aluminum, graphite, copper, and carbon fiber.

+ Add to Cart
product-img product-img

2WDN3 | High-Performance Finishing Carbide Square End Mills

$161.27

The diamond coating on these end mills protects them from wear when milling abrasive materials. Diamond-coated end mills are only used for milling nonferrous materials such as aluminum, graphite, copper, and carbon fiber.

+ Add to Cart
product-img product-img

2WDN4 | High-Performance Finishing Carbide Square End Mills

$202.15

The diamond coating on these end mills protects them from wear when milling abrasive materials. Diamond-coated end mills are only used for milling nonferrous materials such as aluminum, graphite, copper, and carbon fiber.

+ Add to Cart
product-img product-img

4YCJ5 | High-Performance Finishing Carbide Square End Mills

$70.78

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16G156 | High-Performance Finishing Carbide Square End Mills

$32.77

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16G165 | High-Performance Finishing Carbide Square End Mills

$100.79

Six-flute end mills allow for higher feed rates than end mills with fewer flutes and clear chips more quickly than end mills with more flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The bright finish on these end mills provides a smooth, polished surface.

+ Add to Cart
product-img product-img

16G184 | High-Performance Finishing Carbide Square End Mills

$22.21

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
× Success！success