Product catagories

Search Products

FilterClear All

Inquiry

High-Performance Finishing Carbide Square End Mills

product-img product-img

785UG6 | High-Performance Finishing Carbide Square End Mills

$67.33

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UH3 | High-Performance Finishing Carbide Square End Mills

$90.55

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UH4 | High-Performance Finishing Carbide Square End Mills

$146.90

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UJ0 | High-Performance Finishing Carbide Square End Mills

$125.27

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UJ7 | High-Performance Finishing Carbide Square End Mills

$208.95

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UJ9 | High-Performance Finishing Carbide Square End Mills

$22.99

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UK2 | High-Performance Finishing Carbide Square End Mills

$26.93

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UK5 | High-Performance Finishing Carbide Square End Mills

$31.92

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UK8 | High-Performance Finishing Carbide Square End Mills

$41.12

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UL1 | High-Performance Finishing Carbide Square End Mills

$52.39

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UL3 | High-Performance Finishing Carbide Square End Mills

$85.19

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UL8 | High-Performance Finishing Carbide Square End Mills

$96.02

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UM0 | High-Performance Finishing Carbide Square End Mills

$153.77

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UM3 | High-Performance Finishing Carbide Square End Mills

$224.38

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UM6 | High-Performance Finishing Carbide Square End Mills

$311.83

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UM9 | High-Performance Finishing Carbide Square End Mills

$45.95

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UN1 | High-Performance Finishing Carbide Square End Mills

$97.45

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UN2 | High-Performance Finishing Carbide Square End Mills

$173.80

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UN5 | High-Performance Finishing Carbide Square End Mills

$256.28

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UN8 | High-Performance Finishing Carbide Square End Mills

$329.41

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UP0 | High-Performance Finishing Carbide Square End Mills

$22.67

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UP2 | High-Performance Finishing Carbide Square End Mills

$22.99

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UP4 | High-Performance Finishing Carbide Square End Mills

$29.90

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UP6 | High-Performance Finishing Carbide Square End Mills

$40.82

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UP8 | High-Performance Finishing Carbide Square End Mills

$48.56

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UR1 | High-Performance Finishing Carbide Square End Mills

$66.79

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UR3 | High-Performance Finishing Carbide Square End Mills

$288.95

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

785UR4 | High-Performance Finishing Carbide Square End Mills

$317.22

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

808PF2 | High-Performance Finishing Carbide Square End Mills

$23.72

The diamond-like carbon (DLC) coating on these end mills protects them from wear when milling abrasive materials such as stainless steel, ceramics, plastics, and aluminum alloys. DLC-coated end mills are a cost-effective alternative to diamond-coated end mills.

+ Add to Cart
product-img product-img

808PF3 | High-Performance Finishing Carbide Square End Mills

$43.60

The diamond-like carbon (DLC) coating on these end mills protects them from wear when milling abrasive materials such as stainless steel, ceramics, plastics, and aluminum alloys. DLC-coated end mills are a cost-effective alternative to diamond-coated end mills.

+ Add to Cart
× Success！success