Product catagories

Search Products

FilterClear All

Inquiry

High-Performance Finishing Coated Carbide Corner-Radius End Mills

product-img product-img

48JE95 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$433.60

These end mills come in standard sizes expressed in fractional inches and have a shank size that is greater than 1/2". The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JE97 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$427.94

These end mills come in standard sizes expressed in fractional inches and have a shank size that is greater than 1/2". The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JE99 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$215.21

These end mills come in standard sizes expressed in fractional inches and have a shank size that is greater than 1/2". The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JG57 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$20.11

These end mills come in standard sizes expressed in fractional inches and have a shank size that is 1/2" or smaller. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JG58 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$20.00

These end mills come in standard sizes expressed in fractional inches and have a shank size that is 1/2" or smaller. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JG61 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$26.39

These end mills come in standard sizes expressed in fractional inches and have a shank size that is 1/2" or smaller. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JG62 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$26.39

These end mills come in standard sizes expressed in fractional inches and have a shank size that is 1/2" or smaller. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JG64 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$33.22

These end mills come in standard sizes expressed in fractional inches and have a shank size that is 1/2" or smaller. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JG65 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$33.51

These end mills come in standard sizes expressed in fractional inches and have a shank size that is 1/2" or smaller. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JG66 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$33.51

These end mills come in standard sizes expressed in fractional inches and have a shank size that is 1/2" or smaller. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JG68 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$41.46

These end mills come in standard sizes expressed in fractional inches and have a shank size that is 1/2" or smaller. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JG69 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$42.15

These end mills come in standard sizes expressed in fractional inches and have a shank size that is 1/2" or smaller. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JG70 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$42.37

These end mills come in standard sizes expressed in fractional inches and have a shank size that is 1/2" or smaller. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JG78 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$69.50

These end mills come in standard sizes expressed in fractional inches and have a shank size that is 1/2" or smaller. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JG80 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$71.00

These end mills come in standard sizes expressed in fractional inches and have a shank size that is 1/2" or smaller. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JG88 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$120.44

These end mills come in standard sizes expressed in fractional inches and have a shank size that is greater than 1/2". The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JH13 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$38.22

These end mills come in standard sizes expressed in fractional inches and have a shank size that is 1/2" or smaller. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JH14 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$57.55

These end mills come in standard sizes expressed in fractional inches and have a shank size that is 1/2" or smaller. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JY86 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$76.94

These end mills come in standard sizes expressed in millimeters. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JY88 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$157.48

These end mills come in standard sizes expressed in millimeters. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JY91 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$229.65

These end mills come in standard sizes expressed in millimeters. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JY96 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$53.02

These end mills come in standard sizes expressed in millimeters. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JY99 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$53.32

These end mills come in standard sizes expressed in millimeters. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JZ01 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$56.44

These end mills come in standard sizes expressed in millimeters. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JZ04 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$86.74

These end mills come in standard sizes expressed in millimeters. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JZ11 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$179.49

These end mills come in standard sizes expressed in millimeters. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JZ13 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$174.88

These end mills come in standard sizes expressed in millimeters. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JZ18 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$231.17

These end mills come in standard sizes expressed in millimeters. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48KA51 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$59.45

These end mills come in standard sizes expressed in millimeters. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48KA53 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$102.27

These end mills come in standard sizes expressed in millimeters. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
× Success！success