Product catagories

Search Products

FilterClear All

Inquiry

High-Performance Finishing Coated Carbide Corner-Radius End Mills

product-img product-img

54LE88 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$61.31

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

54LE89 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$59.84

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

54LE90 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$80.66

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

54LE91 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$108.61

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

54LE92 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$138.43

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

54LE95 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$68.56

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

54LE96 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$68.56

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

54LE97 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$68.56

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

54LE98 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$72.57

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

54LE99 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$63.58

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

54LF04 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$78.24

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

54LF05 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$69.40

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

54LF06 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$69.40

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

54LF07 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$97.49

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

54LF09 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$97.49

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

54LF10 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$97.49

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

54LF13 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$109.72

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

54LF15 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$131.97

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

54LF18 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$160.53

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

55FF99 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$418.09

The diamond-like carbon (DLC) coating on these end mills protects them from wear when milling abrasive materials such as stainless steel, ceramics, plastics, and aluminum alloys. DLC-coated end mills are a cost-effective alternative to diamond-coated end mills.

+ Add to Cart
product-img product-img

55FG01 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$408.82

The diamond-like carbon (DLC) coating on these end mills protects them from wear when milling abrasive materials such as stainless steel, ceramics, plastics, and aluminum alloys. DLC-coated end mills are a cost-effective alternative to diamond-coated end mills.

+ Add to Cart
product-img product-img

55FG02 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$418.09

The diamond-like carbon (DLC) coating on these end mills protects them from wear when milling abrasive materials such as stainless steel, ceramics, plastics, and aluminum alloys. DLC-coated end mills are a cost-effective alternative to diamond-coated end mills.

+ Add to Cart
product-img product-img

55FG03 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$418.09

The diamond-like carbon (DLC) coating on these end mills protects them from wear when milling abrasive materials such as stainless steel, ceramics, plastics, and aluminum alloys. DLC-coated end mills are a cost-effective alternative to diamond-coated end mills.

+ Add to Cart
product-img product-img

55FG04 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$418.09

The diamond-like carbon (DLC) coating on these end mills protects them from wear when milling abrasive materials such as stainless steel, ceramics, plastics, and aluminum alloys. DLC-coated end mills are a cost-effective alternative to diamond-coated end mills.

+ Add to Cart
product-img product-img

55FG05 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$341.03

The diamond-like carbon (DLC) coating on these end mills protects them from wear when milling abrasive materials such as stainless steel, ceramics, plastics, and aluminum alloys. DLC-coated end mills are a cost-effective alternative to diamond-coated end mills.

+ Add to Cart
product-img product-img

55FG06 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$325.51

The diamond-like carbon (DLC) coating on these end mills protects them from wear when milling abrasive materials such as stainless steel, ceramics, plastics, and aluminum alloys. DLC-coated end mills are a cost-effective alternative to diamond-coated end mills.

+ Add to Cart
product-img product-img

55FG07 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$348.46

The diamond-like carbon (DLC) coating on these end mills protects them from wear when milling abrasive materials such as stainless steel, ceramics, plastics, and aluminum alloys. DLC-coated end mills are a cost-effective alternative to diamond-coated end mills.

+ Add to Cart
product-img product-img

55FG08 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$358.27

The diamond-like carbon (DLC) coating on these end mills protects them from wear when milling abrasive materials such as stainless steel, ceramics, plastics, and aluminum alloys. DLC-coated end mills are a cost-effective alternative to diamond-coated end mills.

+ Add to Cart
product-img product-img

55FG09 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$358.27

The diamond-like carbon (DLC) coating on these end mills protects them from wear when milling abrasive materials such as stainless steel, ceramics, plastics, and aluminum alloys. DLC-coated end mills are a cost-effective alternative to diamond-coated end mills.

+ Add to Cart
product-img product-img

55FG10 | High-Performance Finishing Coated Carbide Corner-Radius End Mills

$358.27

The diamond-like carbon (DLC) coating on these end mills protects them from wear when milling abrasive materials such as stainless steel, ceramics, plastics, and aluminum alloys. DLC-coated end mills are a cost-effective alternative to diamond-coated end mills.

+ Add to Cart
× Success！success