Product catagories

Search Products

FilterClear All

Inquiry

High-Performance Roughing Carbide Corner-Chamfer End Mills

product-img product-img

48KY72 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$86.53

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

48KY75 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$127.82

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

48KY79 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$183.01

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

48KY86 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$46.22

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48KY87 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$47.05

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48KY88 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$47.66

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48KY89 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$50.99

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48KY90 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$73.37

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48KY91 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$96.82

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48KY92 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$114.64

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48KY93 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$143.09

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48KY95 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$207.57

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48KZ50 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$46.36

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

48KZ51 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$51.99

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

48KZ53 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$96.14

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

48KZ58 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$314.98

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

54LF21 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$85.58

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

54LF23 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$110.42

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

54LF30 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$83.76

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

54LF32 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$110.42

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

796M30 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$40.69

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

796M31 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$40.69

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

796M32 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$40.69

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

796M33 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$40.69

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

796M34 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$40.69

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

796M35 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$100.72

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

796M36 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$100.72

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

796M37 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$100.72

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

796M38 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$100.72

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

796M39 | High-Performance Roughing Carbide Corner-Chamfer End Mills

$130.27

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
× Success！success