Product catagories

Search Products

FilterClear All

Inquiry

High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

product-img product-img

55HX24 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$165.89

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
product-img product-img

55HX25 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$165.89

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
product-img product-img

55HX26 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$217.46

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
product-img product-img

55HX27 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$220.37

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
product-img product-img

55HX28 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$217.46

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
product-img product-img

55HX29 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$217.46

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
product-img product-img

55HX30 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$257.26

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
product-img product-img

55HX31 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$257.26

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
product-img product-img

55HX32 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$257.26

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
product-img product-img

55HX33 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$257.26

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
product-img product-img

55HX34 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$257.26

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
product-img product-img

55HX35 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$257.26

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
product-img product-img

55HX36 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$339.74

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
product-img product-img

55HX37 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$339.74

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
product-img product-img

55HX38 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$339.74

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
product-img product-img

55HX39 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$339.74

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
product-img product-img

55HX40 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$396.43

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
product-img product-img

55HX41 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$401.72

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
product-img product-img

55HX42 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$396.43

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
product-img product-img

55HX43 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$396.43

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
product-img product-img

55HX44 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$401.72

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
product-img product-img

55HX45 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$396.43

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
product-img product-img

55HX46 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$396.43

The nACRo coating on these end mills protects them from wear. It is harder and more resistant to high heat than TiAlN, TiCN, AlTiN, and AlCrN coatings.

+ Add to Cart
product-img product-img

55JD38 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$16.16

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

61KY63 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$126.29

Five-flutes end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

61KY64 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$126.69

Five-flutes end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

61KY65 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$179.54

Five-flutes end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

61KY66 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$216.91

Five-flutes end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

61KY67 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$312.00

Five-flutes end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

61KY68 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$306.70

Five-flutes end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
× Success！success