Product catagories

Search Products

FilterClear All

Inquiry

High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

product-img product-img

14T416 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$67.22

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

14T424 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$70.63

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16E916 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$12.53

The ZrN coating on these end mills protects them from wear when milling nonferrous metals. It has a higher oxidation temperature than a TiN coating.

+ Add to Cart
product-img product-img

16E926 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$25.50

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16E928 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$19.30

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16E930 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$19.30

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16E942 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$22.57

The ZrN coating on these end mills protects them from wear when milling nonferrous metals. It has a higher oxidation temperature than a TiN coating.

+ Add to Cart
product-img product-img

16E944 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$21.98

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16E960 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$26.01

The ZrN coating on these end mills protects them from wear when milling nonferrous metals. It has a higher oxidation temperature than a TiN coating.

+ Add to Cart
product-img product-img

16E964 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$34.21

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16E968 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$27.78

The ZrN coating on these end mills protects them from wear when milling nonferrous metals. It has a higher oxidation temperature than a TiN coating.

+ Add to Cart
product-img product-img

16E984 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$25.60

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16E988 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$30.44

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16E990 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$39.29

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

16F005 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$63.09

The ZrN coating on these end mills protects them from wear when milling nonferrous metals. It has a higher oxidation temperature than a TiN coating.

+ Add to Cart
product-img product-img

16F007 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$48.28

The ZrN coating on these end mills protects them from wear when milling nonferrous metals. It has a higher oxidation temperature than a TiN coating.

+ Add to Cart
product-img product-img

16F015 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$69.80

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

33GF52 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$19.50

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

33GF53 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$19.03

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

33GF54 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$22.37

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

33GF55 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$25.38

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

33GF56 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$20.16

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

33GF57 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$21.47

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

33GF58 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$28.44

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

33GF59 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$29.12

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

33GF60 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$25.25

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

33GF61 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$26.63

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

33GF63 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$31.51

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

33GF64 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$32.18

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

33GF65 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$29.87

Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
× Success！success