Product catagories

Search Products

FilterClear All

Inquiry

High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

product-img product-img

34ZT96 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$47.58

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart
product-img product-img

34ZT97 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$47.58

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart
product-img product-img

34ZT98 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$60.73

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart
product-img product-img

34ZT99 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$65.57

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart
product-img product-img

34ZU01 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$65.57

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart
product-img product-img

34ZU02 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$75.57

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart
product-img product-img

34ZU03 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$77.47

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart
product-img product-img

34ZU04 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$77.47

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart
product-img product-img

34ZU05 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$77.47

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart
product-img product-img

34ZU06 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$77.47

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart
product-img product-img

34ZU07 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$146.32

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart
product-img product-img

34ZU08 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$146.32

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart
product-img product-img

34ZU09 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$146.32

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart
product-img product-img

34ZU10 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$146.32

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart
product-img product-img

34ZU11 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$198.18

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart
product-img product-img

34ZU12 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$198.18

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart
product-img product-img

34ZU13 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$198.18

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart
product-img product-img

34ZU14 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$198.18

The EXO coating on these end mills is a multilayered TiAlN coating with a very smooth finish. It resists wear better than a standard TiAlN coating. EXO-coated end mills can be used at high speeds and withstand high temperatures.

+ Add to Cart
product-img product-img

34ZV85 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$126.33

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

34ZV86 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$162.29

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

34ZV87 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$198.85

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

34ZV88 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$270.48

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

34ZV89 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$566.66

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

34ZV90 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$795.39

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

34ZV91 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$136.73

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

34ZV92 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$139.40

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

34ZV93 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$157.91

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

34ZV94 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$166.96

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

34ZV95 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$175.39

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

34ZV96 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$199.24

The WXS coating on these end mills protects them from wear and provides maximum heat resistance when milling nickel-based alloys and hardened steels with a Rockwell hardness of more than 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
× Success！success