Search Products

FilterClear All

Inquiry

High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

36PJ36 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$52.55

The GMX-35 coating on these end mills protects them from wear when milling in high-speed milling and dry machining applications. It is harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PJ50 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$73.24

The GMX-35 coating on these end mills protects them from wear when milling in high-speed milling and dry machining applications. It is harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PJ71 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$25.97

The GMX-35 coating on these end mills protects them from wear when milling in high-speed milling and dry machining applications. It is harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PJ73 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$21.02

The GMX-35 coating on these end mills protects them from wear when milling in high-speed milling and dry machining applications. It is harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PJ76 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$21.02

The GMX-35 coating on these end mills protects them from wear when milling in high-speed milling and dry machining applications. It is harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PK21 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$20.30

The GMX-35 coating on these end mills protects them from wear when milling in high-speed milling and dry machining applications. It is harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PK47 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$146.20

The GMX-35 coating on these end mills protects them from wear when milling in high-speed milling and dry machining applications. It is harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PK51 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$146.20

The GMX-35 coating on these end mills protects them from wear when milling in high-speed milling and dry machining applications. It is harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PK54 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$146.20

The GMX-35 coating on these end mills protects them from wear when milling in high-speed milling and dry machining applications. It is harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PK60 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$154.53

The GMX-35 coating on these end mills protects them from wear when milling in high-speed milling and dry machining applications. It is harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PK78 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$231.06

The GMX-35 coating on these end mills protects them from wear when milling in high-speed milling and dry machining applications. It is harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PK98 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$40.60

The GMX-35 coating on these end mills protects them from wear when milling in high-speed milling and dry machining applications. It is harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PL04 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$31.91

The GMX-35 coating on these end mills protects them from wear when milling in high-speed milling and dry machining applications. It is harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PL09 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$44.68

The GMX-35 coating on these end mills protects them from wear when milling in high-speed milling and dry machining applications. It is harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PL26 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$34.35

The GMX-35 coating on these end mills protects them from wear when milling in high-speed milling and dry machining applications. It is harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PL34 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$40.07

The GMX-35 coating on these end mills protects them from wear when milling in high-speed milling and dry machining applications. It is harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PL62 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$99.73

The GMX-35 coating on these end mills protects them from wear when milling in high-speed milling and dry machining applications. It is harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PL84 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$132.11

The GMX-35 coating on these end mills protects them from wear when milling in high-speed milling and dry machining applications. It is harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PM17 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$61.67

The ZrN coating on these end mills protects them from wear when milling nonferrous metals. It has a higher oxidation temperature than a TiN coating.

+ Add to Cart

36PM30 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$26.69

The ZrN coating on these end mills protects them from wear when milling nonferrous metals. It has a higher oxidation temperature than a TiN coating.

+ Add to Cart

36PM55 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$120.91

The ZrN coating on these end mills protects them from wear when milling nonferrous metals. It has a higher oxidation temperature than a TiN coating.

+ Add to Cart

36PN82 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$65.50

The GMS coating on these end mills protects them from wear when milling high-temperature alloys. It has a lower coefficient of friction than a GMX-35 coating, which helps prevent built-up edge. It is also harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PN83 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$65.50

The GMS coating on these end mills protects them from wear when milling high-temperature alloys. It has a lower coefficient of friction than a GMX-35 coating, which helps prevent built-up edge. It is also harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PN84 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$65.50

The GMS coating on these end mills protects them from wear when milling high-temperature alloys. It has a lower coefficient of friction than a GMX-35 coating, which helps prevent built-up edge. It is also harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PN86 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$65.50

The GMS coating on these end mills protects them from wear when milling high-temperature alloys. It has a lower coefficient of friction than a GMX-35 coating, which helps prevent built-up edge. It is also harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PP09 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$27.90

The GMS coating on these end mills protects them from wear when milling high-temperature alloys. It has a lower coefficient of friction than a GMX-35 coating, which helps prevent built-up edge. It is also harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PP12 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$26.56

The GMS coating on these end mills protects them from wear when milling high-temperature alloys. It has a lower coefficient of friction than a GMX-35 coating, which helps prevent built-up edge. It is also harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PP26 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$159.38

The GMS coating on these end mills protects them from wear when milling high-temperature alloys. It has a lower coefficient of friction than a GMX-35 coating, which helps prevent built-up edge. It is also harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PP49 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$39.46

The GMS coating on these end mills protects them from wear when milling high-temperature alloys. It has a lower coefficient of friction than a GMX-35 coating, which helps prevent built-up edge. It is also harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart

36PP52 | High-Performance Roughing/Finishing Coated Carbide Corner-Radius End Mills

$42.84

The GMS coating on these end mills protects them from wear when milling high-temperature alloys. It has a lower coefficient of friction than a GMX-35 coating, which helps prevent built-up edge. It is also harder and resists high heat better than TiAlN and ZrN coatings.

+ Add to Cart
× Success!success