Search Products

FilterClear All

Inquiry

High-Performance Spiral-Flute Taps for Aluminum

428R58 | High-Performance Spiral-Flute Taps for Aluminum

$71.31

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

428R59 | High-Performance Spiral-Flute Taps for Aluminum

$88.22

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

428R60 | High-Performance Spiral-Flute Taps for Aluminum

$85.00

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

428R61 | High-Performance Spiral-Flute Taps for Aluminum

$102.58

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

428R62 | High-Performance Spiral-Flute Taps for Aluminum

$117.62

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

428R63 | High-Performance Spiral-Flute Taps for Aluminum

$44.24

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

428R70 | High-Performance Spiral-Flute Taps for Aluminum

$34.19

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

428R72 | High-Performance Spiral-Flute Taps for Aluminum

$29.14

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

428R75 | High-Performance Spiral-Flute Taps for Aluminum

$26.12

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

53MV06 | High-Performance Spiral-Flute Taps for Aluminum

$37.49

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps.

+ Add to Cart

53MV07 | High-Performance Spiral-Flute Taps for Aluminum

$39.43

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps.

+ Add to Cart

53MV08 | High-Performance Spiral-Flute Taps for Aluminum

$38.86

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps.

+ Add to Cart

53MV09 | High-Performance Spiral-Flute Taps for Aluminum

$57.95

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps.

+ Add to Cart

53MV10 | High-Performance Spiral-Flute Taps for Aluminum

$59.99

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps.

+ Add to Cart

53MV11 | High-Performance Spiral-Flute Taps for Aluminum

$77.33

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps.

+ Add to Cart

53MV12 | High-Performance Spiral-Flute Taps for Aluminum

$91.43

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps.

+ Add to Cart

53NR34 | High-Performance Spiral-Flute Taps for Aluminum

$32.68

The CrC/C coating on these taps is a multilayer coating with a base layer of titanium nitride (TiN) and an outer layer of chromium carbide carbon (CrC/C). It protects the taps from wear when tapping aluminum and other ferrous and nonferrous materials. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

53NR35 | High-Performance Spiral-Flute Taps for Aluminum

$21.61

The CrC/C coating on these taps is a multilayer coating with a base layer of titanium nitride (TiN) and an outer layer of chromium carbide carbon (CrC/C). It protects the taps from wear when tapping aluminum and other ferrous and nonferrous materials. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

53NR36 | High-Performance Spiral-Flute Taps for Aluminum

$21.73

The CrC/C coating on these taps is a multilayer coating with a base layer of titanium nitride (TiN) and an outer layer of chromium carbide carbon (CrC/C). It protects the taps from wear when tapping aluminum and other ferrous and nonferrous materials. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

53NR37 | High-Performance Spiral-Flute Taps for Aluminum

$17.34

The CrC/C coating on these taps is a multilayer coating with a base layer of titanium nitride (TiN) and an outer layer of chromium carbide carbon (CrC/C). It protects the taps from wear when tapping aluminum and other ferrous and nonferrous materials. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

53NR38 | High-Performance Spiral-Flute Taps for Aluminum

$16.97

The CrC/C coating on these taps is a multilayer coating with a base layer of titanium nitride (TiN) and an outer layer of chromium carbide carbon (CrC/C). It protects the taps from wear when tapping aluminum and other ferrous and nonferrous materials. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

53NR39 | High-Performance Spiral-Flute Taps for Aluminum

$17.78

The CrC/C coating on these taps is a multilayer coating with a base layer of titanium nitride (TiN) and an outer layer of chromium carbide carbon (CrC/C). It protects the taps from wear when tapping aluminum and other ferrous and nonferrous materials. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

53NR40 | High-Performance Spiral-Flute Taps for Aluminum

$18.34

The CrC/C coating on these taps is a multilayer coating with a base layer of titanium nitride (TiN) and an outer layer of chromium carbide carbon (CrC/C). It protects the taps from wear when tapping aluminum and other ferrous and nonferrous materials. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

53NR41 | High-Performance Spiral-Flute Taps for Aluminum

$19.54

The CrC/C coating on these taps is a multilayer coating with a base layer of titanium nitride (TiN) and an outer layer of chromium carbide carbon (CrC/C). It protects the taps from wear when tapping aluminum and other ferrous and nonferrous materials. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

53NR42 | High-Performance Spiral-Flute Taps for Aluminum

$19.50

The CrC/C coating on these taps is a multilayer coating with a base layer of titanium nitride (TiN) and an outer layer of chromium carbide carbon (CrC/C). It protects the taps from wear when tapping aluminum and other ferrous and nonferrous materials. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

53NR43 | High-Performance Spiral-Flute Taps for Aluminum

$19.54

The CrC/C coating on these taps is a multilayer coating with a base layer of titanium nitride (TiN) and an outer layer of chromium carbide carbon (CrC/C). It protects the taps from wear when tapping aluminum and other ferrous and nonferrous materials. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

53NR45 | High-Performance Spiral-Flute Taps for Aluminum

$21.63

The CrC/C coating on these taps is a multilayer coating with a base layer of titanium nitride (TiN) and an outer layer of chromium carbide carbon (CrC/C). It protects the taps from wear when tapping aluminum and other ferrous and nonferrous materials. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

53NR46 | High-Performance Spiral-Flute Taps for Aluminum

$21.62

The CrC/C coating on these taps is a multilayer coating with a base layer of titanium nitride (TiN) and an outer layer of chromium carbide carbon (CrC/C). It protects the taps from wear when tapping aluminum and other ferrous and nonferrous materials. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

53NR47 | High-Performance Spiral-Flute Taps for Aluminum

$21.73

The CrC/C coating on these taps is a multilayer coating with a base layer of titanium nitride (TiN) and an outer layer of chromium carbide carbon (CrC/C). It protects the taps from wear when tapping aluminum and other ferrous and nonferrous materials. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

53NR49 | High-Performance Spiral-Flute Taps for Aluminum

$23.93

The CrC/C coating on these taps is a multilayer coating with a base layer of titanium nitride (TiN) and an outer layer of chromium carbide carbon (CrC/C). It protects the taps from wear when tapping aluminum and other ferrous and nonferrous materials. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
× Success!success