Search Products

FilterClear All

Inquiry

High-Performance Spiral-Flute Taps for Multiple Materials

53MV88 | High-Performance Spiral-Flute Taps for Multiple Materials

$21.35

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

53MV91 | High-Performance Spiral-Flute Taps for Multiple Materials

$19.80

These taps have either a UN coarse (UNC) or UN fine (UNF) thread standard. UNC taps have fewer threads per inch than UNF taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

53MW05 | High-Performance Spiral-Flute Taps for Multiple Materials

$16.96

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

53MW06 | High-Performance Spiral-Flute Taps for Multiple Materials

$16.00

These taps have either a UN coarse (UNC) or UN fine (UNF) thread standard. UNC taps have fewer threads per inch than UNF taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

53MW19 | High-Performance Spiral-Flute Taps for Multiple Materials

$15.16

UN fine (UNF) taps have more threads per inch than UN coarse (UNC) taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart

53MW25 | High-Performance Spiral-Flute Taps for Multiple Materials

$27.19

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

53MW31 | High-Performance Spiral-Flute Taps for Multiple Materials

$27.27

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

53MW39 | High-Performance Spiral-Flute Taps for Multiple Materials

$30.92

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

53MW41 | High-Performance Spiral-Flute Taps for Multiple Materials

$29.15

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

53MW42 | High-Performance Spiral-Flute Taps for Multiple Materials

$24.29

These taps come in standard sizes expressed in millimeters. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

53MW44 | High-Performance Spiral-Flute Taps for Multiple Materials

$30.92

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

53MW50 | High-Performance Spiral-Flute Taps for Multiple Materials

$30.79

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

53MW51 | High-Performance Spiral-Flute Taps for Multiple Materials

$30.69

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

53MW57 | High-Performance Spiral-Flute Taps for Multiple Materials

$25.26

These taps come in standard sizes expressed in millimeters. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

53MW58 | High-Performance Spiral-Flute Taps for Multiple Materials

$25.17

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart

53MW59 | High-Performance Spiral-Flute Taps for Multiple Materials

$31.28

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

53MW96 | High-Performance Spiral-Flute Taps for Multiple Materials

$17.34

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

53MW97 | High-Performance Spiral-Flute Taps for Multiple Materials

$16.00

These taps have either a UN coarse (UNC) or UN fine (UNF) thread standard. UNC taps have fewer threads per inch than UNF taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

53MW99 | High-Performance Spiral-Flute Taps for Multiple Materials

$20.29

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

53MX03 | High-Performance Spiral-Flute Taps for Multiple Materials

$15.10

UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart

53MX10 | High-Performance Spiral-Flute Taps for Multiple Materials

$17.39

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

53MX13 | High-Performance Spiral-Flute Taps for Multiple Materials

$15.48

UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart

53MX14 | High-Performance Spiral-Flute Taps for Multiple Materials

$20.11

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

53MX16 | High-Performance Spiral-Flute Taps for Multiple Materials

$15.47

UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart

53MX18 | High-Performance Spiral-Flute Taps for Multiple Materials

$20.12

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

53MX22 | High-Performance Spiral-Flute Taps for Multiple Materials

$17.75

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

53MX23 | High-Performance Spiral-Flute Taps for Multiple Materials

$15.82

These taps have either a UN coarse (UNC) or UN fine (UNF) thread standard. UNC taps have fewer threads per inch than UNF taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart

53MX24 | High-Performance Spiral-Flute Taps for Multiple Materials

$15.56

UN fine (UNF) taps have more threads per inch than UN coarse (UNC) taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart

53MX25 | High-Performance Spiral-Flute Taps for Multiple Materials

$20.18

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

53MX27 | High-Performance Spiral-Flute Taps for Multiple Materials

$15.53

UN fine (UNF) taps have more threads per inch than UN coarse (UNC) taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
× Success!success