Product catagories

Search Products

FilterClear All

Inquiry

High-Performance Spiral-Flute Taps for Multiple Materials

product-img product-img

427F60 | High-Performance Spiral-Flute Taps for Multiple Materials

$50.41

These taps have either a UN coarse (UNC) or UN fine (UNF) thread standard. UNC taps have fewer threads per inch than UNF taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

427W46 | High-Performance Spiral-Flute Taps for Multiple Materials

$79.88

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant. Coolant-through taps have holes that allow coolant to flow to their tip to reduce heat and friction during threading tasks. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

428C93 | High-Performance Spiral-Flute Taps for Multiple Materials

$42.68

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart
product-img product-img

428C94 | High-Performance Spiral-Flute Taps for Multiple Materials

$38.60

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart
product-img product-img

428C98 | High-Performance Spiral-Flute Taps for Multiple Materials

$55.15

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart
product-img product-img

428H31 | High-Performance Spiral-Flute Taps for Multiple Materials

$43.99

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant. Coolant-through taps have holes that allow coolant to flow to their tip to reduce heat and friction during threading tasks.

+ Add to Cart
product-img product-img

428H40 | High-Performance Spiral-Flute Taps for Multiple Materials

$190.75

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant. Coolant-through taps have holes that allow coolant to flow to their tip to reduce heat and friction during threading tasks.

+ Add to Cart
product-img product-img

429D11 | High-Performance Spiral-Flute Taps for Multiple Materials

$36.08

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant.

+ Add to Cart
product-img product-img

429D20 | High-Performance Spiral-Flute Taps for Multiple Materials

$35.30

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant.

+ Add to Cart
product-img product-img

429D60 | High-Performance Spiral-Flute Taps for Multiple Materials

$179.17

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant. Coolant-through taps have holes that allow coolant to flow to their tip to reduce heat and friction during threading tasks.

+ Add to Cart
product-img product-img

429F41 | High-Performance Spiral-Flute Taps for Multiple Materials

$39.52

These taps come in standard sizes expressed in millimeters. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

445C20 | High-Performance Spiral-Flute Taps for Multiple Materials

$17.47

UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

445C21 | High-Performance Spiral-Flute Taps for Multiple Materials

$22.72

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

445D35 | High-Performance Spiral-Flute Taps for Multiple Materials

$17.38

UN fine (UNF) taps have more threads per inch than UN coarse (UNC) taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

445D39 | High-Performance Spiral-Flute Taps for Multiple Materials

$17.01

UN fine (UNF) taps have more threads per inch than UN coarse (UNC) taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

445D53 | High-Performance Spiral-Flute Taps for Multiple Materials

$18.65

UN fine (UNF) taps have more threads per inch than UN coarse (UNC) taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

445F06 | High-Performance Spiral-Flute Taps for Multiple Materials

$20.03

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

445F07 | High-Performance Spiral-Flute Taps for Multiple Materials

$15.40

UN fine (UNF) taps have more threads per inch than UN coarse (UNC) taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

445F27 | High-Performance Spiral-Flute Taps for Multiple Materials

$15.77

UN fine (UNF) taps have more threads per inch than UN coarse (UNC) taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

445G79 | High-Performance Spiral-Flute Taps for Multiple Materials

$38.53

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart
product-img product-img

445H50 | High-Performance Spiral-Flute Taps for Multiple Materials

$32.41

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart
product-img product-img

445H52 | High-Performance Spiral-Flute Taps for Multiple Materials

$27.94

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart
product-img product-img

445H74 | High-Performance Spiral-Flute Taps for Multiple Materials

$32.32

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart
product-img product-img

445H94 | High-Performance Spiral-Flute Taps for Multiple Materials

$58.01

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart
product-img product-img

445J17 | High-Performance Spiral-Flute Taps for Multiple Materials

$259.78

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart
product-img product-img

445J44 | High-Performance Spiral-Flute Taps for Multiple Materials

$34.05

These taps come in standard sizes expressed in millimeters. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

45EP04 | High-Performance Spiral-Flute Taps for Multiple Materials

$36.34

The TiAlN coating on these taps withstands high temperatures and protects the taps from wear. It allows the taps to be used at faster speeds than taps with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45ET22 | High-Performance Spiral-Flute Taps for Multiple Materials

$23.84

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45ET38 | High-Performance Spiral-Flute Taps for Multiple Materials

$33.63

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

45ET43 | High-Performance Spiral-Flute Taps for Multiple Materials

$72.25

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
× Success！success