Search Products

FilterClear All

Inquiry

High-Performance Spiral-Flute Taps for Multiple Materials

445C77 | High-Performance Spiral-Flute Taps for Multiple Materials

$56.66

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

445C78 | High-Performance Spiral-Flute Taps for Multiple Materials

$77.29

These taps come in standard sizes expressed in millimeters. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart

445C79 | High-Performance Spiral-Flute Taps for Multiple Materials

$100.47

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

445D29 | High-Performance Spiral-Flute Taps for Multiple Materials

$22.71

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

445D30 | High-Performance Spiral-Flute Taps for Multiple Materials

$22.71

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

445D31 | High-Performance Spiral-Flute Taps for Multiple Materials

$17.38

UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart

445D32 | High-Performance Spiral-Flute Taps for Multiple Materials

$21.78

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

445D33 | High-Performance Spiral-Flute Taps for Multiple Materials

$16.75

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart

445D34 | High-Performance Spiral-Flute Taps for Multiple Materials

$22.71

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

445D36 | High-Performance Spiral-Flute Taps for Multiple Materials

$22.61

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

445D37 | High-Performance Spiral-Flute Taps for Multiple Materials

$17.38

UN fine (UNF) taps have more threads per inch than UN coarse (UNC) taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart

445D38 | High-Performance Spiral-Flute Taps for Multiple Materials

$22.61

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

445D42 | High-Performance Spiral-Flute Taps for Multiple Materials

$25.29

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

445D43 | High-Performance Spiral-Flute Taps for Multiple Materials

$25.29

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

445D44 | High-Performance Spiral-Flute Taps for Multiple Materials

$19.36

UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart

445D45 | High-Performance Spiral-Flute Taps for Multiple Materials

$24.25

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

445D46 | High-Performance Spiral-Flute Taps for Multiple Materials

$18.19

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart

445D51 | High-Performance Spiral-Flute Taps for Multiple Materials

$18.94

UN fine (UNF) taps have more threads per inch than UN coarse (UNC) taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart

445D56 | High-Performance Spiral-Flute Taps for Multiple Materials

$28.21

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

445D58 | High-Performance Spiral-Flute Taps for Multiple Materials

$20.78

UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart

445D60 | High-Performance Spiral-Flute Taps for Multiple Materials

$20.78

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart

445D61 | High-Performance Spiral-Flute Taps for Multiple Materials

$26.14

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

445D62 | High-Performance Spiral-Flute Taps for Multiple Materials

$21.57

UN fine (UNF) taps have more threads per inch than UN coarse (UNC) taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart

445D63 | High-Performance Spiral-Flute Taps for Multiple Materials

$28.07

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

445D67 | High-Performance Spiral-Flute Taps for Multiple Materials

$26.36

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

445D69 | High-Performance Spiral-Flute Taps for Multiple Materials

$40.07

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

445D71 | High-Performance Spiral-Flute Taps for Multiple Materials

$29.59

UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart

445D74 | High-Performance Spiral-Flute Taps for Multiple Materials

$40.07

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

445D77 | High-Performance Spiral-Flute Taps for Multiple Materials

$29.59

UN fine (UNF) taps have more threads per inch than UN coarse (UNC) taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart

445D79 | High-Performance Spiral-Flute Taps for Multiple Materials

$30.35

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
× Success!success