Search Products

FilterClear All

Inquiry

High-Performance Spiral-Point Taps for Multiple Materials

427W09 | High-Performance Spiral-Point Taps for Multiple Materials

$45.79

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

427W10 | High-Performance Spiral-Point Taps for Multiple Materials

$38.19

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

427W11 | High-Performance Spiral-Point Taps for Multiple Materials

$66.30

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

427W13 | High-Performance Spiral-Point Taps for Multiple Materials

$54.82

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

427W14 | High-Performance Spiral-Point Taps for Multiple Materials

$37.01

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

427W15 | High-Performance Spiral-Point Taps for Multiple Materials

$35.60

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

427W16 | High-Performance Spiral-Point Taps for Multiple Materials

$80.60

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

427W35 | High-Performance Spiral-Point Taps for Multiple Materials

$49.95

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

427W36 | High-Performance Spiral-Point Taps for Multiple Materials

$44.51

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

427W37 | High-Performance Spiral-Point Taps for Multiple Materials

$75.46

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

427W38 | High-Performance Spiral-Point Taps for Multiple Materials

$59.88

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

427W40 | High-Performance Spiral-Point Taps for Multiple Materials

$92.61

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

427W42 | High-Performance Spiral-Point Taps for Multiple Materials

$118.56

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

427W43 | High-Performance Spiral-Point Taps for Multiple Materials

$81.82

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

427W98 | High-Performance Spiral-Point Taps for Multiple Materials

$37.70

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

427W99 | High-Performance Spiral-Point Taps for Multiple Materials

$55.07

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

427X03 | High-Performance Spiral-Point Taps for Multiple Materials

$69.31

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

427X04 | High-Performance Spiral-Point Taps for Multiple Materials

$159.70

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

427X05 | High-Performance Spiral-Point Taps for Multiple Materials

$90.47

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

427X16 | High-Performance Spiral-Point Taps for Multiple Materials

$35.54

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

427X17 | High-Performance Spiral-Point Taps for Multiple Materials

$34.58

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

427X19 | High-Performance Spiral-Point Taps for Multiple Materials

$84.81

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

427X20 | High-Performance Spiral-Point Taps for Multiple Materials

$98.50

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart

428C23 | High-Performance Spiral-Point Taps for Multiple Materials

$51.93

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant.

+ Add to Cart

428C24 | High-Performance Spiral-Point Taps for Multiple Materials

$44.77

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant.

+ Add to Cart

428C25 | High-Performance Spiral-Point Taps for Multiple Materials

$40.53

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant.

+ Add to Cart

428C26 | High-Performance Spiral-Point Taps for Multiple Materials

$37.64

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant.

+ Add to Cart

428C27 | High-Performance Spiral-Point Taps for Multiple Materials

$40.53

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant.

+ Add to Cart

428C28 | High-Performance Spiral-Point Taps for Multiple Materials

$43.48

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant.

+ Add to Cart

428C29 | High-Performance Spiral-Point Taps for Multiple Materials

$57.62

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant.

+ Add to Cart
× Success!success