Product catagories

Search Products

FilterClear All

Inquiry

High-Performance Spiral-Point Taps for Multiple Materials

product-img product-img

53ND25 | High-Performance Spiral-Point Taps for Multiple Materials

$16.66

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

53ND26 | High-Performance Spiral-Point Taps for Multiple Materials

$14.97

These taps come in standard sizes expressed in millimeters. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

53ND27 | High-Performance Spiral-Point Taps for Multiple Materials

$14.88

These taps come in standard sizes expressed in millimeters. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

53ND28 | High-Performance Spiral-Point Taps for Multiple Materials

$15.92

These taps come in standard sizes expressed in millimeters. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

53ND30 | High-Performance Spiral-Point Taps for Multiple Materials

$19.30

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

53ND31 | High-Performance Spiral-Point Taps for Multiple Materials

$17.28

These taps come in standard sizes expressed in millimeters. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

53ND35 | High-Performance Spiral-Point Taps for Multiple Materials

$19.87

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

53ND36 | High-Performance Spiral-Point Taps for Multiple Materials

$18.56

These taps come in standard sizes expressed in millimeters. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

53ND37 | High-Performance Spiral-Point Taps for Multiple Materials

$17.35

These taps come in standard sizes expressed in millimeters. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

53ND38 | High-Performance Spiral-Point Taps for Multiple Materials

$17.27

These taps come in standard sizes expressed in millimeters. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

53ND40 | High-Performance Spiral-Point Taps for Multiple Materials

$28.36

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

53ND41 | High-Performance Spiral-Point Taps for Multiple Materials

$25.26

These taps come in standard sizes expressed in millimeters. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

53ND43 | High-Performance Spiral-Point Taps for Multiple Materials

$23.89

These taps come in standard sizes expressed in millimeters. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

53ND44 | High-Performance Spiral-Point Taps for Multiple Materials

$18.40

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

53ND46 | High-Performance Spiral-Point Taps for Multiple Materials

$15.05

These taps have a unified thread standard. UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

53ND49 | High-Performance Spiral-Point Taps for Multiple Materials

$15.01

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

53ND50 | High-Performance Spiral-Point Taps for Multiple Materials

$18.41

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

53ND53 | High-Performance Spiral-Point Taps for Multiple Materials

$15.26

These taps have a unified thread standard. UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

53ND56 | High-Performance Spiral-Point Taps for Multiple Materials

$19.49

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

53ND68 | High-Performance Spiral-Point Taps for Multiple Materials

$25.63

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

53ND74 | High-Performance Spiral-Point Taps for Multiple Materials

$25.87

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

53ND79 | High-Performance Spiral-Point Taps for Multiple Materials

$37.63

These taps have a unified thread standard. UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

53ND80 | High-Performance Spiral-Point Taps for Multiple Materials

$37.17

These taps have a unified thread standard. UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

53ND82 | High-Performance Spiral-Point Taps for Multiple Materials

$48.50

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

53ND85 | High-Performance Spiral-Point Taps for Multiple Materials

$37.66

These taps have a unified thread standard. UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

53ND89 | High-Performance Spiral-Point Taps for Multiple Materials

$64.78

These taps have a unified thread standard. UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

53ND90 | High-Performance Spiral-Point Taps for Multiple Materials

$89.49

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

53ND93 | High-Performance Spiral-Point Taps for Multiple Materials

$63.25

These taps have a unified thread standard. UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

53ND94 | High-Performance Spiral-Point Taps for Multiple Materials

$81.98

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

53ND97 | High-Performance Spiral-Point Taps for Multiple Materials

$82.27

These taps have a unified thread standard. UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
× Success！success