Product catagories

Search Products

FilterClear All

Inquiry

High-Performance Spiral-Point Taps for Multiple Materials

product-img product-img

428C30 | High-Performance Spiral-Point Taps for Multiple Materials

$59.99

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart
product-img product-img

428C35 | High-Performance Spiral-Point Taps for Multiple Materials

$34.86

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart
product-img product-img

428C53 | High-Performance Spiral-Point Taps for Multiple Materials

$46.24

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant.

+ Add to Cart
product-img product-img

428C54 | High-Performance Spiral-Point Taps for Multiple Materials

$57.62

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant.

+ Add to Cart
product-img product-img

429C82 | High-Performance Spiral-Point Taps for Multiple Materials

$38.05

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant.

+ Add to Cart
product-img product-img

429C97 | High-Performance Spiral-Point Taps for Multiple Materials

$89.77

The THL coating on these taps protects them from wear and provides better chip formation than TiN and TiCN coatings. THL-coated taps are suitable for threading high-speed steel, cast iron, and aluminum alloys, and they can be used with or without coolant.

+ Add to Cart
product-img product-img

445A13 | High-Performance Spiral-Point Taps for Multiple Materials

$17.29

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

445A19 | High-Performance Spiral-Point Taps for Multiple Materials

$14.63

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

445A28 | High-Performance Spiral-Point Taps for Multiple Materials

$11.27

These taps have a unified thread standard. UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

445A40 | High-Performance Spiral-Point Taps for Multiple Materials

$1.31

These taps have a unified thread standard. UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

445A54 | High-Performance Spiral-Point Taps for Multiple Materials

$11.37

These taps have a unified thread standard. UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

445A63 | High-Performance Spiral-Point Taps for Multiple Materials

$1.31

These taps have a unified thread standard. UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

445A83 | High-Performance Spiral-Point Taps for Multiple Materials

$14.69

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

445A90 | High-Performance Spiral-Point Taps for Multiple Materials

$14.69

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

445C03 | High-Performance Spiral-Point Taps for Multiple Materials

$16.24

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

445C05 | High-Performance Spiral-Point Taps for Multiple Materials

$1.45

These taps have a unified thread standard. UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

53MW83 | High-Performance Spiral-Point Taps for Multiple Materials

$10.69

These taps have a unified thread standard. UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

53MW91 | High-Performance Spiral-Point Taps for Multiple Materials

$10.70

These taps have a unified thread standard. UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

53MX45 | High-Performance Spiral-Point Taps for Multiple Materials

$19.34

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

53MX47 | High-Performance Spiral-Point Taps for Multiple Materials

$14.91

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

53MX53 | High-Performance Spiral-Point Taps for Multiple Materials

$2.14

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

53MZ83 | High-Performance Spiral-Point Taps for Multiple Materials

$14.09

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

53MZ84 | High-Performance Spiral-Point Taps for Multiple Materials

$6.40

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

53NA07 | High-Performance Spiral-Point Taps for Multiple Materials

$6.76

Oversized taps have a slightly larger pitch diameter than standard taps. They are used to make threads in a hole before a coating or treatment is applied to the hole. Once the coating or treatment is applied, the threads will be reduced to the standard pitch diameter. The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

53NA09 | High-Performance Spiral-Point Taps for Multiple Materials

$10.15

These taps have a unified thread standard. UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

53NA53 | High-Performance Spiral-Point Taps for Multiple Materials

$1.45

These taps have a unified thread standard. UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

53NA63 | High-Performance Spiral-Point Taps for Multiple Materials

$17.34

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

53NC05 | High-Performance Spiral-Point Taps for Multiple Materials

$26.65

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
product-img product-img

53NC36 | High-Performance Spiral-Point Taps for Multiple Materials

$376.10

These taps have a unified thread standard. UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

53NC41 | High-Performance Spiral-Point Taps for Multiple Materials

$94.42

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart
× Success！success