Search Products

FilterClear All

Inquiry

High-Performance Spiral-Point Taps for Multiple Materials

274FC3 | High-Performance Spiral-Point Taps for Multiple Materials

$16.49

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

274FC4 | High-Performance Spiral-Point Taps for Multiple Materials

$15.36

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

274FC5 | High-Performance Spiral-Point Taps for Multiple Materials

$15.43

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

274FC6 | High-Performance Spiral-Point Taps for Multiple Materials

$16.52

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

274FC7 | High-Performance Spiral-Point Taps for Multiple Materials

$17.22

These taps have a unified thread standard. UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart

274FC9 | High-Performance Spiral-Point Taps for Multiple Materials

$28.94

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

274FD0 | High-Performance Spiral-Point Taps for Multiple Materials

$28.81

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

274FD1 | High-Performance Spiral-Point Taps for Multiple Materials

$142.71

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

274FD2 | High-Performance Spiral-Point Taps for Multiple Materials

$67.18

The TiN coating on these taps protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

274FE3 | High-Performance Spiral-Point Taps for Multiple Materials

$19.45

These taps have a unified thread standard. UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart

274FE4 | High-Performance Spiral-Point Taps for Multiple Materials

$10.41

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

274FE5 | High-Performance Spiral-Point Taps for Multiple Materials

$19.45

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating.

+ Add to Cart

274KA2 | High-Performance Spiral-Point Taps for Multiple Materials

$16.31

These taps are designed for tapping holes for aerospace fasteners, which require a tight fit. The taps have a TiN coating that protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

274KA3 | High-Performance Spiral-Point Taps for Multiple Materials

$15.96

These taps are designed for tapping holes for aerospace fasteners, which require a tight fit. The taps have a TiN coating that protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

274LE0 | High-Performance Spiral-Point Taps for Multiple Materials

$15.52

These taps are designed for tapping holes for aerospace fasteners, which require a tight fit. The taps have a TiN coating that protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

274LE1 | High-Performance Spiral-Point Taps for Multiple Materials

$15.52

These taps are designed for tapping holes for aerospace fasteners, which require a tight fit. The taps have a TiN coating that protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

274LE2 | High-Performance Spiral-Point Taps for Multiple Materials

$15.81

These taps are designed for tapping holes for aerospace fasteners, which require a tight fit. The taps have a TiN coating that protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

274ME5 | High-Performance Spiral-Point Taps for Multiple Materials

$29.27

These taps are designed for tapping holes for aerospace fasteners, which require a tight fit. The taps have a TiN coating that protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

274ME6 | High-Performance Spiral-Point Taps for Multiple Materials

$29.27

These taps are designed for tapping holes for aerospace fasteners, which require a tight fit. The taps have a TiN coating that protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

274ME7 | High-Performance Spiral-Point Taps for Multiple Materials

$20.68

These taps are designed for tapping holes for aerospace fasteners, which require a tight fit. The taps have a TiN coating that protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

274ME8 | High-Performance Spiral-Point Taps for Multiple Materials

$20.68

These taps are designed for tapping holes for aerospace fasteners, which require a tight fit. The taps have a TiN coating that protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

274MR8 | High-Performance Spiral-Point Taps for Multiple Materials

$12.92

These taps are designed for tapping holes for aerospace fasteners, which require a tight fit. The taps have a TiN coating that protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

274MR9 | High-Performance Spiral-Point Taps for Multiple Materials

$12.65

These taps are designed for tapping holes for aerospace fasteners, which require a tight fit. The taps have a TiN coating that protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

274MT0 | High-Performance Spiral-Point Taps for Multiple Materials

$12.65

These taps are designed for tapping holes for aerospace fasteners, which require a tight fit. The taps have a TiN coating that protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

274MT1 | High-Performance Spiral-Point Taps for Multiple Materials

$12.65

These taps are designed for tapping holes for aerospace fasteners, which require a tight fit. The taps have a TiN coating that protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

274MT2 | High-Performance Spiral-Point Taps for Multiple Materials

$12.65

These taps are designed for tapping holes for aerospace fasteners, which require a tight fit. The taps have a TiN coating that protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

274MT3 | High-Performance Spiral-Point Taps for Multiple Materials

$12.65

These taps are designed for tapping holes for aerospace fasteners, which require a tight fit. The taps have a TiN coating that protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

274MT4 | High-Performance Spiral-Point Taps for Multiple Materials

$12.65

These taps are designed for tapping holes for aerospace fasteners, which require a tight fit. The taps have a TiN coating that protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

274MT5 | High-Performance Spiral-Point Taps for Multiple Materials

$12.65

These taps are designed for tapping holes for aerospace fasteners, which require a tight fit. The taps have a TiN coating that protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart

274MT6 | High-Performance Spiral-Point Taps for Multiple Materials

$12.65

These taps are designed for tapping holes for aerospace fasteners, which require a tight fit. The taps have a TiN coating that protects them from wear and allows them to be used at higher speeds than taps with a bright finish.

+ Add to Cart
× Success!success