Product catagories

Search Products

FilterClear All

Inquiry

High-Performance Thread-Forming Taps for Aluminum

product-img product-img

53MT82 | High-Performance Thread-Forming Taps for Aluminum

$150.23

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

53MT83 | High-Performance Thread-Forming Taps for Aluminum

$173.34

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

53MU56 | High-Performance Thread-Forming Taps for Aluminum

$75.86

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

53MU64 | High-Performance Thread-Forming Taps for Aluminum

$93.20

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

53MU65 | High-Performance Thread-Forming Taps for Aluminum

$104.51

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

53MU67 | High-Performance Thread-Forming Taps for Aluminum

$166.92

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

53MU69 | High-Performance Thread-Forming Taps for Aluminum

$145.09

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

53MU70 | High-Performance Thread-Forming Taps for Aluminum

$156.43

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

53MU71 | High-Performance Thread-Forming Taps for Aluminum

$181.04

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

53MU72 | High-Performance Thread-Forming Taps for Aluminum

$220.75

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

53NM41 | High-Performance Thread-Forming Taps for Aluminum

$130.06

The CrC/C coating on these taps is a multilayer coating with a base layer of titanium nitride (TiN) and an outer layer of chromium carbide carbon (CrC/C). It protects taps from wear when tapping aluminum and other ferrous and nonferrous materials. Coolant-through taps have holes that allow coolant to flow to their tip to reduce heat and friction during threading tasks.

+ Add to Cart
product-img product-img

53NM42 | High-Performance Thread-Forming Taps for Aluminum

$142.53

The CrC/C coating on these taps is a multilayer coating with a base layer of titanium nitride (TiN) and an outer layer of chromium carbide carbon (CrC/C). It protects taps from wear when tapping aluminum and other ferrous and nonferrous materials. Coolant-through taps have holes that allow coolant to flow to their tip to reduce heat and friction during threading tasks.

+ Add to Cart
product-img product-img

53NM43 | High-Performance Thread-Forming Taps for Aluminum

$183.59

The CrC/C coating on these taps is a multilayer coating with a base layer of titanium nitride (TiN) and an outer layer of chromium carbide carbon (CrC/C). It protects taps from wear when tapping aluminum and other ferrous and nonferrous materials. Coolant-through taps have holes that allow coolant to flow to their tip to reduce heat and friction during threading tasks.

+ Add to Cart
product-img product-img

53NM44 | High-Performance Thread-Forming Taps for Aluminum

$209.24

The CrC/C coating on these taps is a multilayer coating with a base layer of titanium nitride (TiN) and an outer layer of chromium carbide carbon (CrC/C). It protects taps from wear when tapping aluminum and other ferrous and nonferrous materials. Coolant-through taps have holes that allow coolant to flow to their tip to reduce heat and friction during threading tasks.

+ Add to Cart
product-img product-img

33XC34 | High-Performance Thread-Forming Taps for Aluminum

$288.94

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

33XC38 | High-Performance Thread-Forming Taps for Aluminum

$380.43

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

33XC39 | High-Performance Thread-Forming Taps for Aluminum

$380.43

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

33XC40 | High-Performance Thread-Forming Taps for Aluminum

$380.43

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

33XC41 | High-Performance Thread-Forming Taps for Aluminum

$380.43

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

33XC42 | High-Performance Thread-Forming Taps for Aluminum

$380.43

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

53MT69 | High-Performance Thread-Forming Taps for Aluminum

$56.37

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

53MT70 | High-Performance Thread-Forming Taps for Aluminum

$56.63

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

53MT71 | High-Performance Thread-Forming Taps for Aluminum

$61.07

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

53MT72 | High-Performance Thread-Forming Taps for Aluminum

$75.10

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

53MT73 | High-Performance Thread-Forming Taps for Aluminum

$90.58

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

53MT74 | High-Performance Thread-Forming Taps for Aluminum

$112.34

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

53MT75 | High-Performance Thread-Forming Taps for Aluminum

$128.75

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

53MT76 | High-Performance Thread-Forming Taps for Aluminum

$220.24

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

53MT77 | High-Performance Thread-Forming Taps for Aluminum

$107.73

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
product-img product-img

53MT78 | High-Performance Thread-Forming Taps for Aluminum

$113.56

The diamond-like carbon (DLC) coating on these taps protects them from wear when threading abrasive materials. DLC-coated taps are a cost-effective alternative to diamond-coated taps. These taps meet DIN length standards and have a longer overall length than taps that meet ISO, ANSI, and JIS length standards. They also meet ANSI shank standards, which means they measure their shank diameter in inches and fit in standard tools used in the U.S.

+ Add to Cart
× Success！success