Product catagories

Search Products

FilterClear All

Inquiry

High-Speed Steel Chucking Reamers with Straight Shank

product-img product-img

20D184 | High-Speed Steel Chucking Reamers with Straight Shank

$17.67

Oversized high-speed steel chucking reamers are slightly larger than a standard size. They provide a loose fit for standard-size fasteners and other parts that install in the hole. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D185 | High-Speed Steel Chucking Reamers with Straight Shank

$18.72

Wire-size high-speed steel chucking reamers come in standard sizes that correspond to American Wire Gauge (AWG) sizes. This ensures compatibility when inserting a wire of the same wire size into the hole created by the tool. The larger the wire size, the smaller the reamer. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. They enlarge the hole to an exact size for a precise fit when installing fasteners or other parts. This prevents damage to the reamer and the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D186 | High-Speed Steel Chucking Reamers with Straight Shank

$22.88

Wire-size high-speed steel chucking reamers come in standard sizes that correspond to American Wire Gauge (AWG) sizes. This ensures compatibility when inserting a wire of the same wire size into the hole created by the tool. The larger the wire size, the smaller the reamer. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. They enlarge the hole to an exact size for a precise fit when installing fasteners or other parts. This prevents damage to the reamer and the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D187 | High-Speed Steel Chucking Reamers with Straight Shank

$22.88

Metric high-speed steel chucking reamers come in standard sizes expressed in millimeters. Right-hand, spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. They enlarge the hole to an exact size for a precise fit when installing fasteners or other parts. This prevents damage to the reamer and the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D188 | High-Speed Steel Chucking Reamers with Straight Shank

$22.88

Wire-size high-speed steel chucking reamers come in standard sizes that correspond to American Wire Gauge (AWG) sizes. This ensures compatibility when inserting a wire of the same wire size into the hole created by the tool. The larger the wire size, the smaller the reamer. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. They enlarge the hole to an exact size for a precise fit when installing fasteners or other parts. This prevents damage to the reamer and the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D189 | High-Speed Steel Chucking Reamers with Straight Shank

$22.88

These high-speed steel chucking reamers come in standard sizes expressed in fractional inches. Fractional inch is the most common trade size used for chucking reamers. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D190 | High-Speed Steel Chucking Reamers with Straight Shank

$22.88

Wire-size high-speed steel chucking reamers come in standard sizes that correspond to American Wire Gauge (AWG) sizes. This ensures compatibility when inserting a wire of the same wire size into the hole created by the tool. The larger the wire size, the smaller the reamer. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. They enlarge the hole to an exact size for a precise fit when installing fasteners or other parts. This prevents damage to the reamer and the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D191 | High-Speed Steel Chucking Reamers with Straight Shank

$22.88

Wire-size high-speed steel chucking reamers come in standard sizes that correspond to American Wire Gauge (AWG) sizes. This ensures compatibility when inserting a wire of the same wire size into the hole created by the tool. The larger the wire size, the smaller the reamer. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. They enlarge the hole to an exact size for a precise fit when installing fasteners or other parts. This prevents damage to the reamer and the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D192 | High-Speed Steel Chucking Reamers with Straight Shank

$22.88

Wire-size high-speed steel chucking reamers come in standard sizes that correspond to American Wire Gauge (AWG) sizes. This ensures compatibility when inserting a wire of the same wire size into the hole created by the tool. The larger the wire size, the smaller the reamer. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. They enlarge the hole to an exact size for a precise fit when installing fasteners or other parts. This prevents damage to the reamer and the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D193 | High-Speed Steel Chucking Reamers with Straight Shank

$22.88

Wire-size high-speed steel chucking reamers come in standard sizes that correspond to American Wire Gauge (AWG) sizes. This ensures compatibility when inserting a wire of the same wire size into the hole created by the tool. The larger the wire size, the smaller the reamer. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. They enlarge the hole to an exact size for a precise fit when installing fasteners or other parts. This prevents damage to the reamer and the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D194 | High-Speed Steel Chucking Reamers with Straight Shank

$22.88

Wire-size high-speed steel chucking reamers come in standard sizes that correspond to American Wire Gauge (AWG) sizes. This ensures compatibility when inserting a wire of the same wire size into the hole created by the tool. The larger the wire size, the smaller the reamer. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. They enlarge the hole to an exact size for a precise fit when installing fasteners or other parts. This prevents damage to the reamer and the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D195 | High-Speed Steel Chucking Reamers with Straight Shank

$23.78

These high-speed steel chucking reamers come in standard sizes expressed in fractional inches. Fractional inch is the most common trade size used for chucking reamers. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D196 | High-Speed Steel Chucking Reamers with Straight Shank

$22.88

Wire-size high-speed steel chucking reamers come in standard sizes that correspond to American Wire Gauge (AWG) sizes. This ensures compatibility when inserting a wire of the same wire size into the hole created by the tool. The larger the wire size, the smaller the reamer. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. They enlarge the hole to an exact size for a precise fit when installing fasteners or other parts. This prevents damage to the reamer and the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D197 | High-Speed Steel Chucking Reamers with Straight Shank

$22.88

Metric high-speed steel chucking reamers come in standard sizes expressed in millimeters. Right-hand, spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. They enlarge the hole to an exact size for a precise fit when installing fasteners or other parts. This prevents damage to the reamer and the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D198 | High-Speed Steel Chucking Reamers with Straight Shank

$22.88

Wire-size high-speed steel chucking reamers come in standard sizes that correspond to American Wire Gauge (AWG) sizes. This ensures compatibility when inserting a wire of the same wire size into the hole created by the tool. The larger the wire size, the smaller the reamer. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. They enlarge the hole to an exact size for a precise fit when installing fasteners or other parts. This prevents damage to the reamer and the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D199 | High-Speed Steel Chucking Reamers with Straight Shank

$23.24

Wire-size high-speed steel chucking reamers come in standard sizes that correspond to American Wire Gauge (AWG) sizes. This ensures compatibility when inserting a wire of the same wire size into the hole created by the tool. The larger the wire size, the smaller the reamer. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. They enlarge the hole to an exact size for a precise fit when installing fasteners or other parts. This prevents damage to the reamer and the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D201 | High-Speed Steel Chucking Reamers with Straight Shank

$22.88

Wire-size high-speed steel chucking reamers come in standard sizes that correspond to American Wire Gauge (AWG) sizes. This ensures compatibility when inserting a wire of the same wire size into the hole created by the tool. The larger the wire size, the smaller the reamer. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. They enlarge the hole to an exact size for a precise fit when installing fasteners or other parts. This prevents damage to the reamer and the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D202 | High-Speed Steel Chucking Reamers with Straight Shank

$23.24

Wire-size high-speed steel chucking reamers come in standard sizes that correspond to American Wire Gauge (AWG) sizes. This ensures compatibility when inserting a wire of the same wire size into the hole created by the tool. The larger the wire size, the smaller the reamer. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. They enlarge the hole to an exact size for a precise fit when installing fasteners or other parts. This prevents damage to the reamer and the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D203 | High-Speed Steel Chucking Reamers with Straight Shank

$23.08

These high-speed steel chucking reamers come in standard sizes expressed in fractional inches. Fractional inch is the most common trade size used for chucking reamers. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D204 | High-Speed Steel Chucking Reamers with Straight Shank

$23.80

Wire-size high-speed steel chucking reamers come in standard sizes that correspond to American Wire Gauge (AWG) sizes. This ensures compatibility when inserting a wire of the same wire size into the hole created by the tool. The larger the wire size, the smaller the reamer. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. They enlarge the hole to an exact size for a precise fit when installing fasteners or other parts. This prevents damage to the reamer and the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D205 | High-Speed Steel Chucking Reamers with Straight Shank

$22.88

Wire-size high-speed steel chucking reamers come in standard sizes that correspond to American Wire Gauge (AWG) sizes. This ensures compatibility when inserting a wire of the same wire size into the hole created by the tool. The larger the wire size, the smaller the reamer. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. They enlarge the hole to an exact size for a precise fit when installing fasteners or other parts. This prevents damage to the reamer and the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D206 | High-Speed Steel Chucking Reamers with Straight Shank

$22.88

Metric high-speed steel chucking reamers come in standard sizes expressed in millimeters. Right-hand, spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. They enlarge the hole to an exact size for a precise fit when installing fasteners or other parts. This prevents damage to the reamer and the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D207 | High-Speed Steel Chucking Reamers with Straight Shank

$24.32

Wire-size high-speed steel chucking reamers come in standard sizes that correspond to American Wire Gauge (AWG) sizes. This ensures compatibility when inserting a wire of the same wire size into the hole created by the tool. The larger the wire size, the smaller the reamer. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. They enlarge the hole to an exact size for a precise fit when installing fasteners or other parts. This prevents damage to the reamer and the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D208 | High-Speed Steel Chucking Reamers with Straight Shank

$24.32

Wire-size high-speed steel chucking reamers come in standard sizes that correspond to American Wire Gauge (AWG) sizes. This ensures compatibility when inserting a wire of the same wire size into the hole created by the tool. The larger the wire size, the smaller the reamer. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. They enlarge the hole to an exact size for a precise fit when installing fasteners or other parts. This prevents damage to the reamer and the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D209 | High-Speed Steel Chucking Reamers with Straight Shank

$24.32

Wire-size high-speed steel chucking reamers come in standard sizes that correspond to American Wire Gauge (AWG) sizes. This ensures compatibility when inserting a wire of the same wire size into the hole created by the tool. The larger the wire size, the smaller the reamer. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. They enlarge the hole to an exact size for a precise fit when installing fasteners or other parts. This prevents damage to the reamer and the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D210 | High-Speed Steel Chucking Reamers with Straight Shank

$23.73

Undersized high-speed steel chucking reamers are slightly smaller than a standard size. This helps ensure a tight fit when inserting a standard-size item in a hole made by the tool. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D211 | High-Speed Steel Chucking Reamers with Straight Shank

$22.51

These high-speed steel chucking reamers come in standard sizes expressed in fractional inches. Fractional inch is the most common trade size used for chucking reamers. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D212 | High-Speed Steel Chucking Reamers with Straight Shank

$23.43

Oversized high-speed steel chucking reamers are slightly larger than a standard size. They provide a loose fit for standard-size fasteners and other parts that install in the hole. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D213 | High-Speed Steel Chucking Reamers with Straight Shank

$24.68

Wire-size high-speed steel chucking reamers come in standard sizes that correspond to American Wire Gauge (AWG) sizes. This ensures compatibility when inserting a wire of the same wire size into the hole created by the tool. The larger the wire size, the smaller the reamer. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. They enlarge the hole to an exact size for a precise fit when installing fasteners or other parts. This prevents damage to the reamer and the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
product-img product-img

20D214 | High-Speed Steel Chucking Reamers with Straight Shank

$27.22

Wire-size high-speed steel chucking reamers come in standard sizes that correspond to American Wire Gauge (AWG) sizes. This ensures compatibility when inserting a wire of the same wire size into the hole created by the tool. The larger the wire size, the smaller the reamer. Right-hand spiral-flute reamers draw chips up out of the hole and are used for reaming blind holes that do not continue all the way through the workpiece. They enlarge the hole to an exact size for a precise fit when installing fasteners or other parts. This prevents damage to the reamer and the workpiece. Spiral-flute reamers leave a smoother finish on the hole than straight-flute reamers. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool.

+ Add to Cart
× Success！success