Product catagories

Search Products

FilterClear All

Inquiry

High-Speed Steel Extended-Length Drill Bits

product-img product-img

440J89 | High-Speed Steel Extended-Length Drill Bits

$29.66

The TiNAl coating on these drill bits provides a low-friction surface and is suitable for drilling most materials. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440W29 | High-Speed Steel Extended-Length Drill Bits

$5.21

These drill bits come in standard sizes expressed in millimeters. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440X53 | High-Speed Steel Extended-Length Drill Bits

$14.06

These drill bits come in standard sizes expressed in millimeters. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

440Y81 | High-Speed Steel Extended-Length Drill Bits

$22.01

These drill bits come in standard sizes expressed in millimeters. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

50CE59 | High-Speed Steel Extended-Length Drill Bits

$7.87

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

406X93 | High-Speed Steel Extended-Length Drill Bits

$27.92

These extended-length drill bits meet National Aerospace Standards (NAS) 907 Type B for drill bits used in aircraft repair and production. They have a black-oxide finish that retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

438Z77 | High-Speed Steel Extended-Length Drill Bits

$24.52

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

439A36 | High-Speed Steel Extended-Length Drill Bits

$28.28

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

439A37 | High-Speed Steel Extended-Length Drill Bits

$28.34

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

439A38 | High-Speed Steel Extended-Length Drill Bits

$31.44

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

439F25 | High-Speed Steel Extended-Length Drill Bits

$18.27

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

439F26 | High-Speed Steel Extended-Length Drill Bits

$18.43

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

439F27 | High-Speed Steel Extended-Length Drill Bits

$17.67

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

439F28 | High-Speed Steel Extended-Length Drill Bits

$19.01

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

439F29 | High-Speed Steel Extended-Length Drill Bits

$19.14

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

439F30 | High-Speed Steel Extended-Length Drill Bits

$19.21

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

439F31 | High-Speed Steel Extended-Length Drill Bits

$19.23

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

439F32 | High-Speed Steel Extended-Length Drill Bits

$19.66

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

439F33 | High-Speed Steel Extended-Length Drill Bits

$19.67

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

439F34 | High-Speed Steel Extended-Length Drill Bits

$20.08

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

439F35 | High-Speed Steel Extended-Length Drill Bits

$19.84

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

439F36 | High-Speed Steel Extended-Length Drill Bits

$20.49

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

439F37 | High-Speed Steel Extended-Length Drill Bits

$21.16

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

439F38 | High-Speed Steel Extended-Length Drill Bits

$22.20

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

439F39 | High-Speed Steel Extended-Length Drill Bits

$22.54

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

439F41 | High-Speed Steel Extended-Length Drill Bits

$25.19

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

439F42 | High-Speed Steel Extended-Length Drill Bits

$25.22

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

439F43 | High-Speed Steel Extended-Length Drill Bits

$24.26

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

439F44 | High-Speed Steel Extended-Length Drill Bits

$27.49

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
product-img product-img

439F45 | High-Speed Steel Extended-Length Drill Bits

$27.96

The black-oxide finish on these bits retains lubricants to improve their wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

+ Add to Cart
× Success！success