Product catagories

Search Products

FilterClear All

Inquiry

High-Speed Steel Straight-Flute Hand Taps

product-img product-img

33YM25 | High-Speed Steel Straight-Flute Hand Taps

$20.40

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YM26 | High-Speed Steel Straight-Flute Hand Taps

$19.41

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YM27 | High-Speed Steel Straight-Flute Hand Taps

$19.41

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YM28 | High-Speed Steel Straight-Flute Hand Taps

$16.80

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YM29 | High-Speed Steel Straight-Flute Hand Taps

$21.03

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YM30 | High-Speed Steel Straight-Flute Hand Taps

$21.03

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YM31 | High-Speed Steel Straight-Flute Hand Taps

$21.03

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YM32 | High-Speed Steel Straight-Flute Hand Taps

$26.77

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YM33 | High-Speed Steel Straight-Flute Hand Taps

$35.17

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YM34 | High-Speed Steel Straight-Flute Hand Taps

$26.77

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YM35 | High-Speed Steel Straight-Flute Hand Taps

$35.17

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YM36 | High-Speed Steel Straight-Flute Hand Taps

$23.87

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YM37 | High-Speed Steel Straight-Flute Hand Taps

$35.17

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YM38 | High-Speed Steel Straight-Flute Hand Taps

$26.77

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YM39 | High-Speed Steel Straight-Flute Hand Taps

$34.50

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YM40 | High-Speed Steel Straight-Flute Hand Taps

$35.17

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YM41 | High-Speed Steel Straight-Flute Hand Taps

$34.64

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YM42 | High-Speed Steel Straight-Flute Hand Taps

$32.05

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YM43 | High-Speed Steel Straight-Flute Hand Taps

$39.85

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YM44 | High-Speed Steel Straight-Flute Hand Taps

$39.85

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YM45 | High-Speed Steel Straight-Flute Hand Taps

$39.22

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YM46 | High-Speed Steel Straight-Flute Hand Taps

$32.05

The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.

+ Add to Cart
product-img product-img

33YM47 | High-Speed Steel Straight-Flute Hand Taps

$39.85

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YM48 | High-Speed Steel Straight-Flute Hand Taps

$39.85

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YM49 | High-Speed Steel Straight-Flute Hand Taps

$39.22

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
product-img product-img

33YM50 | High-Speed Steel Straight-Flute Hand Taps

$7.45

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

33YM51 | High-Speed Steel Straight-Flute Hand Taps

$7.45

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

33YM52 | High-Speed Steel Straight-Flute Hand Taps

$8.20

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

33YM53 | High-Speed Steel Straight-Flute Hand Taps

$8.06

The bright finish on these taps provides a smooth, polished surface.

+ Add to Cart
product-img product-img

33YM54 | High-Speed Steel Straight-Flute Hand Taps

$13.62

The TiCN coating on these taps protects them from wear and is harder and more wear-resistant than a TiN coating. Non-coolant-through taps do not have coolant holes, so a separate hose is required to bring coolant to the cutting area if it is needed.

+ Add to Cart
× Success！success