Product catagories

Search Products

FilterClear All

Inquiry

Internal Threading Tools

product-img product-img

16T167 | Internal Threading Tools

$27.43

id :1744, Mfr Model :ITL-180750, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :0.0660 in, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :2-1/2 in, Shank Dia :1/4 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :0.0400 in, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Fractional Inch, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.0230 in, Manufacturer Grade :BXC, Thread Direction :Left Hand, Included Angle :60 °, Max Hole Depth :3/4 in, Min Teeth per Inch :24, Max Thread Pitch :1.50mm, Max Threads per Inch :56, Min Hole Dia :0.1800 in, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T168 | Internal Threading Tools

$27.11

id :1745, Mfr Model :ITL-2001000, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :0.0750 in, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :2-1/2 in, Shank Dia :1/4 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :0.0400 in, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Fractional Inch, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.0260 in, Manufacturer Grade :BXC, Thread Direction :Left Hand, Included Angle :60 °, Max Hole Depth :1 in, Min Teeth per Inch :24, Max Thread Pitch :1.50mm, Max Threads per Inch :40, Min Hole Dia :0.2000 in, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T169 | Internal Threading Tools

$26.98

id :1746, Mfr Model :ITL-200400, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :0.0750 in, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :2-1/2 in, Shank Dia :1/4 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :0.0450 in, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Fractional Inch, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.0260 in, Manufacturer Grade :BXC, Thread Direction :Left Hand, Included Angle :60 °, Max Hole Depth :0.4000 in, Min Teeth per Inch :24, Max Thread Pitch :1.50mm, Max Threads per Inch :40, Min Hole Dia :0.20 in, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T170 | Internal Threading Tools

$27.11

id :1747, Mfr Model :ITL-200600, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :0.0750 in, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :2-1/2 in, Shank Dia :1/4 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :0.0450 in, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Fractional Inch, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.0260 in, Manufacturer Grade :BXC, Thread Direction :Left Hand, Included Angle :60 °, Max Hole Depth :0.6000 in, Min Teeth per Inch :24, Max Thread Pitch :1.50mm, Max Threads per Inch :40, Min Hole Dia :0.2000 in, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T171 | Internal Threading Tools

$27.11

id :1748, Mfr Model :ITL-200750, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :0.0750 in, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :2-1/2 in, Shank Dia :1/4 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :0.0450 in, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Fractional Inch, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.0260 in, Manufacturer Grade :BXC, Thread Direction :Left Hand, Included Angle :60 °, Max Hole Depth :3/4 in, Min Teeth per Inch :24, Max Thread Pitch :1.50mm, Max Threads per Inch :40, Min Hole Dia :0.2000 in, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T172 | Internal Threading Tools

$33.94

id :1749, Mfr Model :ITL-2301000, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :0.0740 in, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :2-1/2 in, Shank Dia :5/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :0.0550 in, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Fractional Inch, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.0320 in, Manufacturer Grade :BXC, Thread Direction :Left Hand, Included Angle :60 °, Max Hole Depth :1 in, Min Teeth per Inch :20, Max Thread Pitch :1.50mm, Max Threads per Inch :40, Min Hole Dia :0.2300 in, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T174 | Internal Threading Tools

$33.94

id :1750, Mfr Model :ITL-230400, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :0.0740 in, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :2-1/2 in, Shank Dia :5/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :0.0550 in, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Fractional Inch, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.0320 in, Manufacturer Grade :BXC, Thread Direction :Left Hand, Included Angle :60 °, Max Hole Depth :0.4000 in, Min Teeth per Inch :20, Max Thread Pitch :1.50mm, Max Threads per Inch :40, Min Hole Dia :0.2300 in, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T175 | Internal Threading Tools

$33.94

id :1751, Mfr Model :ITL-230600, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :0.0740 in, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :2-1/2 in, Shank Dia :5/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :0.0550 in, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Fractional Inch, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.0320 in, Manufacturer Grade :BXC, Thread Direction :Left Hand, Included Angle :60 °, Max Hole Depth :0.6000 in, Min Teeth per Inch :20, Max Thread Pitch :1.50mm, Max Threads per Inch :40, Min Hole Dia :0.2300 in, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T176 | Internal Threading Tools

$33.77

id :1752, Mfr Model :ITL-230750, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :0.0740 in, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :2-1/2 in, Shank Dia :5/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :0.0550 in, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Fractional Inch, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.0320 in, Manufacturer Grade :BXC, Thread Direction :Left Hand, Included Angle :60 °, Max Hole Depth :3/4 in, Min Teeth per Inch :20, Max Thread Pitch :1.50mm, Max Threads per Inch :40, Min Hole Dia :0.2300 in, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T177 | Internal Threading Tools

$33.94

id :1753, Mfr Model :ITL-2901000, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :0.1340 in, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :2-1/2 in, Shank Dia :5/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :0.0700 in, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Fractional Inch, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.0400 in, Manufacturer Grade :BXC, Thread Direction :Left Hand, Included Angle :60 °, Max Hole Depth :1 in, Min Teeth per Inch :14, Max Thread Pitch :1.50mm, Max Threads per Inch :40, Min Hole Dia :0.2900 in, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T178 | Internal Threading Tools

$33.11

id :1754, Mfr Model :ITL-2901250, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :0.1340 in, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :2-1/2 in, Shank Dia :5/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :0.0700 in, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Fractional Inch, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.0400 in, Manufacturer Grade :BXC, Thread Direction :Left Hand, Included Angle :60 °, Max Hole Depth :1-1/4 in, Min Teeth per Inch :14, Max Thread Pitch :1.50mm, Max Threads per Inch :40, Min Hole Dia :0.2900 in, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T180 | Internal Threading Tools

$32.83

id :1755, Mfr Model :ITL-290500, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :0.1340 in, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :2-1/2 in, Shank Dia :5/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :0.0700 in, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Fractional Inch, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.0400 in, Manufacturer Grade :BXC, Thread Direction :Left Hand, Included Angle :60 °, Max Hole Depth :1/2 in, Min Teeth per Inch :14, Max Thread Pitch :1.50mm, Max Threads per Inch :40, Min Hole Dia :0.2900 in, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T181 | Internal Threading Tools

$34.07

id :1756, Mfr Model :ITL-290750, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :0.1340 in, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :2-1/2 in, Shank Dia :5/16 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :0.0700 in, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Fractional Inch, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.0400 in, Manufacturer Grade :BXC, Thread Direction :Left Hand, Included Angle :60 °, Max Hole Depth :3/4 in, Min Teeth per Inch :14, Max Thread Pitch :1.50mm, Max Threads per Inch :40, Min Hole Dia :0.2900 in, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T182 | Internal Threading Tools

$44.21

id :1757, Mfr Model :ITL-3201000, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :0.1330 in, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :2-1/2 in, Shank Dia :3/8 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :0.0750 in, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Fractional Inch, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.0430 in, Manufacturer Grade :BXC, Thread Direction :Left Hand, Included Angle :60 °, Max Hole Depth :1 in, Min Teeth per Inch :10, Max Thread Pitch :1.50mm, Max Threads per Inch :32, Min Hole Dia :0.3200 in, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T183 | Internal Threading Tools

$44.21

id :1758, Mfr Model :ITL-3201250, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :0.1330 in, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :2-1/2 in, Shank Dia :3/8 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :0.0750 in, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Fractional Inch, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.0430 in, Manufacturer Grade :BXC, Thread Direction :Left Hand, Included Angle :60 °, Max Hole Depth :1-1/4 in, Min Teeth per Inch :10, Max Thread Pitch :1.50mm, Max Threads per Inch :32, Min Hole Dia :0.3200 in, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T185 | Internal Threading Tools

$44.21

id :1759, Mfr Model :ITL-320500, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :0.1330 in, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :2-1/2 in, Shank Dia :3/8 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :0.0750 in, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Fractional Inch, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.0430 in, Manufacturer Grade :BXC, Thread Direction :Left Hand, Included Angle :60 °, Max Hole Depth :1/2 in, Min Teeth per Inch :10, Max Thread Pitch :1.50mm, Max Threads per Inch :32, Min Hole Dia :0.3200 in, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T186 | Internal Threading Tools

$44.21

id :1760, Mfr Model :ITL-320750, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :0.1330 in, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :2-1/2 in, Shank Dia :3/8 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :0.0750 in, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Fractional Inch, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.0430 in, Manufacturer Grade :BXC, Thread Direction :Left Hand, Included Angle :60 °, Max Hole Depth :3/4 in, Min Teeth per Inch :10, Max Thread Pitch :1.50mm, Max Threads per Inch :32, Min Hole Dia :0.3200 in, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T187 | Internal Threading Tools

$44.21

id :1761, Mfr Model :ITL-3601000, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :0.1730 in, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :2-1/2 in, Shank Dia :3/8 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :0.0850 in, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Fractional Inch, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.0490 in, Manufacturer Grade :BXC, Thread Direction :Left Hand, Included Angle :60 °, Max Hole Depth :1 in, Min Teeth per Inch :10, Max Thread Pitch :1.50mm, Max Threads per Inch :32, Min Hole Dia :0.3600 in, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T188 | Internal Threading Tools

$44.72

id :1762, Mfr Model :ITL-3601250, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :0.1730 in, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :2-1/2 in, Shank Dia :3/8 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :0.0850 in, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Fractional Inch, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.0490 in, Manufacturer Grade :BXC, Thread Direction :Left Hand, Included Angle :60 °, Max Hole Depth :1-1/4 in, Min Teeth per Inch :10, Max Thread Pitch :1.50mm, Max Threads per Inch :32, Min Hole Dia :0.3600 in, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T189 | Internal Threading Tools

$44.21

id :1763, Mfr Model :ITL-3601800, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :0.1730 in, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :2-1/2 in, Shank Dia :3/8 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :0.0850 in, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Fractional Inch, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.0490 in, Manufacturer Grade :BXC, Thread Direction :Left Hand, Included Angle :60 °, Max Hole Depth :1.8000 in, Min Teeth per Inch :10, Max Thread Pitch :1.50mm, Max Threads per Inch :32, Min Hole Dia :0.3600 in, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T190 | Internal Threading Tools

$44.00

id :1764, Mfr Model :ITL-360500, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :0.1730 in, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :2-1/2 in, Shank Dia :3/8 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :0.0850 in, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Fractional Inch, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.0490 in, Manufacturer Grade :BXC, Thread Direction :Left Hand, Included Angle :60 °, Max Hole Depth :1/2 in, Min Teeth per Inch :10, Max Thread Pitch :1.50mm, Max Threads per Inch :32, Min Hole Dia :0.3600 in, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T191 | Internal Threading Tools

$44.21

id :1765, Mfr Model :ITL-360750, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :0.1730 in, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :2-1/2 in, Shank Dia :3/8 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :0.0850 in, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Fractional Inch, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.0490 in, Manufacturer Grade :BXC, Thread Direction :Left Hand, Included Angle :60 °, Max Hole Depth :3/4 in, Min Teeth per Inch :10, Max Thread Pitch :1.50mm, Max Threads per Inch :32, Min Hole Dia :0.3600 in, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T192 | Internal Threading Tools

$62.75

id :1766, Mfr Model :ITL-4901500, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :0.2400 in, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :3 in, Shank Dia :1/2 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :0.1200 in, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Fractional Inch, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.0690 in, Manufacturer Grade :BXC, Thread Direction :Left Hand, Included Angle :60 °, Max Hole Depth :1-1/2 in, Min Teeth per Inch :6, Max Thread Pitch :1.50mm, Max Threads per Inch :24, Min Hole Dia :0.4900 in, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T193 | Internal Threading Tools

$62.02

id :1767, Mfr Model :ITL-4902000, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :0.2400 in, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :3 in, Shank Dia :1/2 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :0.1200 in, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Fractional Inch, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.0690 in, Manufacturer Grade :BXC, Thread Direction :Left Hand, Included Angle :60 °, Max Hole Depth :2 in, Min Teeth per Inch :6, Max Thread Pitch :1.50mm, Max Threads per Inch :24, Min Hole Dia :0.4900 in, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T194 | Internal Threading Tools

$62.02

id :1768, Mfr Model :ITL-490750, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :0.2400 in, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :3 in, Shank Dia :1/2 in, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :0.1200 in, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Fractional Inch, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.0690 in, Manufacturer Grade :BXC, Thread Direction :Left Hand, Included Angle :60 °, Max Hole Depth :3/4 in, Min Teeth per Inch :6, Max Thread Pitch :1.50mm, Max Threads per Inch :24, Min Hole Dia :0.4900 in, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T195 | Internal Threading Tools

$26.76

id :1769, Mfr Model :ITM-064613, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :1.60mm, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :57.00mm, Shank Dia :6.00mm, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :1.22mm, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Metric, Shank Material :Carbide, Primary Material Application :Cast Iron; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; P, Offset Point :0.71mm, Manufacturer Grade :BXC, Thread Direction :Right Hand, Included Angle :60 °, Max Hole Depth :13.00mm, Min Teeth per Inch :6, Max Thread Pitch :1.50mm, Max Threads per Inch :24, Min Hole Dia :4.60mm, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T196 | Internal Threading Tools

$29.83

id :1770, Mfr Model :ITM-064613G, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :1.60mm, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :57.00mm, Shank Dia :6.00mm, Finish Machining :TiN, Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :1.22mm, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Metric, Shank Material :Carbide, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Copper; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; N; P, Offset Point :0.71mm, Manufacturer Grade :BXC, Thread Direction :Right Hand, Included Angle :60 °, Max Hole Depth :13.00mm, Min Teeth per Inch :6, Max Thread Pitch :1.50mm, Max Threads per Inch :24, Min Hole Dia :4.60mm, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T197 | Internal Threading Tools

$26.76

id :1771, Mfr Model :ITM-064625, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :1.60mm, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :57.00mm, Shank Dia :6.00mm, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :1.22mm, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Metric, Shank Material :Carbide, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Copper; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; N; P, Offset Point :0.71mm, Manufacturer Grade :BXC, Thread Direction :Right Hand, Included Angle :60 °, Max Hole Depth :25.00mm, Min Teeth per Inch :6, Max Thread Pitch :1.50mm, Max Threads per Inch :24, Min Hole Dia :4.60mm, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T198 | Internal Threading Tools

$29.53

id :1772, Mfr Model :ITM-064625G, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :1.60mm, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :57.00mm, Shank Dia :6.00mm, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :1.22mm, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Metric, Shank Material :Carbide, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Copper; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; N; P, Offset Point :0.71mm, Manufacturer Grade :BXC, Thread Direction :Right Hand, Included Angle :60 °, Max Hole Depth :25.00mm, Min Teeth per Inch :6, Max Thread Pitch :1.50mm, Max Threads per Inch :24, Min Hole Dia :4.60mm, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
product-img product-img

16T199 | Internal Threading Tools

$26.63

id :1773, Mfr Model :ITM-065115, Cutter Material :Carbide, Cutting Direction :Right Hand, Center to Cutting Tip :2.10mm, Features :Corner Radius Profile; Polished Split Face for Improved Edge Retention and Chip Evacuation While Reducing Galling; Split Geometry Makes the Tool as Rigid as Possible, Cutting Application :Threading, Overall Length :57.00mm, Shank Dia :6.00mm, Finish Machining :Bright (Uncoated), Shank Type Machining :Straight with Three Flats, UNSPSC :23153309, Country of Origin :USA (subject to change), Projection :1.32mm, Coolant Fed :Coolant Through, For Use With :Holder SIM...H6, Measurement System :Metric, Shank Material :Carbide, Primary Material Application :Aluminum; Brass; Bronze; Cast Iron; Copper; Stainless Steel; Steel, Primary Material Application ISO Code :K; M; N; P, Offset Point :0.76mm, Manufacturer Grade :BXC, Thread Direction :Right Hand, Included Angle :60 °, Max Hole Depth :15.00mm, Min Teeth per Inch :6, Max Thread Pitch :1.70mm, Max Threads per Inch :24, Min Hole Dia :5.10mm, Thread Profile Type :Partial, Thread Standard :ANSI; Metric 60°; UN, Flat Width :0.0410 in,

+ Add to Cart
× Success！success