Search Products

FilterClear All

Inquiry

Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

434P18 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$5.78

These drill bits come in standard sizes expressed in millimeters. They have a TiN coating that protects them from wear and heat when drilling steel, stainless steel, and aluminum. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434P19 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$7.48

These drill bits come in standard sizes expressed in millimeters. They have a TiN coating that protects them from wear and heat when drilling steel, stainless steel, and aluminum. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434P20 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$6.77

These drill bits come in standard sizes expressed in millimeters. They have a TiN coating that protects them from wear and heat when drilling steel, stainless steel, and aluminum. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434P21 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$8.56

These drill bits come in standard sizes expressed in millimeters. They have a TiN coating that protects them from wear and heat when drilling steel, stainless steel, and aluminum. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434P22 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$8.61

These drill bits come in standard sizes expressed in millimeters. They have a TiN coating that protects them from wear and heat when drilling steel, stainless steel, and aluminum. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434P23 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$10.10

These drill bits come in standard sizes expressed in millimeters. They have a TiN coating that protects them from wear and heat when drilling steel, stainless steel, and aluminum. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434P24 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$11.37

These drill bits come in standard sizes expressed in millimeters. They have a TiN coating that protects them from wear and heat when drilling steel, stainless steel, and aluminum. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434P25 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$12.41

These drill bits come in standard sizes expressed in millimeters. They have a TiN coating that protects them from wear and heat when drilling steel, stainless steel, and aluminum. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434P27 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$13.32

These drill bits come in standard sizes expressed in millimeters. They have a TiN coating that protects them from wear and heat when drilling steel, stainless steel, and aluminum. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434P29 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$16.94

These drill bits come in standard sizes expressed in millimeters. They have a TiN coating that protects them from wear and heat when drilling steel, stainless steel, and aluminum. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434R73 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$5.87

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434R74 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$5.99

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434R75 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$5.99

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434R76 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$6.26

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434R77 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$5.54

These drill bits come in standard sizes expressed in fractional inches. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434R78 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$6.15

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434R79 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$5.51

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434R81 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$5.71

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434R82 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$5.62

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434R84 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$5.48

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434R85 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.77

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434R86 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$3.19

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434R87 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.96

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434R88 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.73

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434R89 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.90

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434R90 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.74

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434R91 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.75

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434R92 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.93

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart

434R93 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.80

Wire-size drill bits come in standard sizes that correspond to American Wire Gauge (AWG) sizes. The larger the wire size, the smaller the bit. These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece, and their straight shank installs into a drill chuck or similar toolholder.

+ Add to Cart

434R94 | Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits 02

$2.83

These drill bits come in standard sizes expressed in millimeters. They have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. The bits' spiral flutes evacuate chips as the bits drill into a workpiece. These bits have a straight shank that installs into a drill chuck or similar toolholder.

+ Add to Cart
× Success!success